Replacement Trimming Blade
www.truecable.com
Hardware / Tool Accessories

Replacement Trimming Blade

$7.99
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

trueCABLE

View Store

Compatible Replacement trimming blade specifically designed for our All-In-One Crimp and Termination Tool. Instructions **These blades are very sharp, be careful when handling them** The flush cut blade that removes conductors from the nose of the RJ45 plug is replaceable. First, lock the tool and use a Phillips screwdriver to back out the screw. Now, unlock the tool to lower the presser bar and termination teeth. Using a rod or other thin, rigid tool inserted from the opposite side, tap until the blade assembly is dislodged from the locator roll-pin found below the screw. Once the blade assembly has been pushed off, put a fresh blade assembly onto the locator roll-pin. Replace the screw and tighten it down firmly. Fully CLOSE and lock the tool handle. Using a Phillips screwdriver, back out and remove the screw. Note there is a roll pin still holding the blade onto the tool. Turn the tool over. OPEN the operating handle. Carefully tap the flush cut blade off of the roll pin. Do not acc

Show More Show Less