EPS32 Kit for Arduino UNO R4 WIFI with sensors and modules boards
Processor: ARM cortex M4 Memory: 256KBF1ash/32KBSRAM Operating Voltage: 5V Input Voltage: 6~24V Clock Frequency: 48MHz Programming port: USB-C Programming port: USB-C WiFi/Bluetooth: ESP32-S3-MINI Light Emitting Diode Matrix: 12x8( 96 red LEDs) Additional connections: Qwiic connector, OFF pin, VRTC pin Number of digital 1/0 interfaces: 14 Number of PWM interfaces: 6 Number of ADC interfaces: 6 Number of DAC interfaces: 1 (12-bit) Number of SPI interfaces: 1 Number of I2C interfaces: 1 Number of CAN interfaces: 1 UNO R4 WIFI is an ESP32-S3 microcontroller-based development board from Arduino, combining the classic design of Arduino UNO with Wi-Fi functionality. 1. Microcontroller Model: ESP32-S3 Architecture: 32-bit XtensaLX7 Dual-Core Processor Main Frequency: 240MHz Flash Memory: 16MB SRAM: 512 KB PSRAM: 8 MB 2. Wireless Connectivity Wi-Fi: supports 802.11 b/g/n (2.4 GHz) Bluetooth: supports Bluetooth 5.0 (including BLE) 3. GPIO Pins Digital I/O pins: 14 (6 of them support PWM output) Analog Input pins: 6 (10-bit ADC) UART:2 I2C:1 SPI:1 4. Power Supply Operating Voltage: 5V Input Voltage: 6-20V (7-12V is recommended) USB Interface: TYPE-C 5 . Other Features LED Indicator: Built-in RGB LED Reset Button:1pc User Button:1pc Dimensions: Same as standard Arduino UNO (68.6mm x 53.4mm) 6. Development Environment IDE: Support Arduino IDEProgramming Language: C/C++ 7. Compatibility Expansion Board Compatibility: Compatible with most Arduino UNO Expansion Boards (Shields) 8. Power Consumption Operating Current: Approx. 80mA (when Wi-Fi is on) Standby Current: Approx. 5mA