OWC Gemini/Mercury Elite Pro Dual 2-Bay RAID Array USB 3.2 Gen 2 Waterproof Case - 1 Capacity

Drive not includedTurtle Cases for Hard Drives and Flash or SSD Drives are engineered specifically for protecting information that is stored digitally. This heavy duty, waterproof case protects one of the following cases and cords with precision cut anti-static foam during transport and storage (9.4 x 5.8 x 3.3" storage cavity): OWC Mercury Elite Pro Dual 2 Bay RAID Array Gen 2 - USB 3.2 OWC Pro U.2 Dual 2 Bay Thunderbolt 3 RAID Array OWC Gemini Thunderbolt 3 Docking Station and RAID Download Data Sheet Features Dustproof and waterproof ATA Impact certified Precision cut foam holds drives securely Pink foam dissipates static charges Pad lockable  Dual action latches prevent accidental opening  Large easy to grip handle Heavy duty construction  Made in North America  Lifetime warranty Shipping dims: 16" x 13" x 8" Shipping weight: 6 lbsCompatible Locks Turtle Lock - 5020 Turtle Lock - 6000 Turtle Lock - TSA Certifications Waterproof  IPX7Dustproof  IP6XImpact  ATA 300 Drop Test  ASTM D-4169 CC-18Vibration  STM D-4169 DC-18Rainfall  ASTM D-4169 DCc-18 Immersion  MIL-STD-810F Descriptions of Tests ATA Specification 300 Category 1Airline transport container suitable for a minimum of 100 airline tripsImpact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure. ASTM D-4169 DC-18Level 1 Schedule A Handling (Manual)Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition. ASTM D-4169 DC-18Level 1, Schedule F loose load vibrationVibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads. ASTM D-4169 DC-18Level 1, Schedule H Environmental Hazard RainfallSimulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C. MIL-STD-810FMethod 512.4Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.IP 67 ingress protection6- Total protection from dust7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)