TeraTurtle LT0 Premium Protective Case - 50 Capacity (with jewel case)

This waterproof heavy duty case stores 50 LTO tapes in their plastic jewel boxes and provides protection against the key problems that cause data loss: physical damage from impact tape distortion from wound-in debris fast and large changes in temperature and humidity Download Data Sheet Features Waterproof Superior cushioning and no exposed foam or debris generating agents Individual slots for each tape Dustproof ATA Impact certified Stainless steel hardware Double movement latches prevent accidental opening Double padlockable Lifetime warranty Shipping dims: 25" x 21" x 9" Shipping weight: 15 lbsCompatible Locks Turtle Lock - 5020 Turtle Lock - TSA Certifications Waterproof  IPX7Dustproof  IP6XImpact  ATA 300 Drop Test  ASTM D-4169 CC-18Vibration  STM D-4169 DC-18Rainfall  ASTM D-4169 DCc-18 Immersion  MIL-STD-810F Descriptions of Tests ATA Specification 300 Category 1Airline transport container suitable for a minimum of 100 airline tripsImpact Resistance Test; samples were exposed to impact using a bar weighing 13.2lbs with a hemispherical end of 3.2cm. Bar was dropped with its longitudinal axis vertical on to each sample’s weakest point from a height of 0.5m. Samples were conditioned to a temperature of -20°C before impact exposure. ASTM D-4169 DC-18Level 1 Schedule A Handling (Manual)Drop tests - a series of drops on each edge, corner and face of the case from a height of no less than 48cm(19”) and with loads of 6.8-31.8kg(15-70lbs) determined by case size. Samples were conditioned at lab ambient conditions and then temperatures of -28°C and +60°C for a minimum of 3 hours at each condition. ASTM D-4169 DC-18Level 1, Schedule F loose load vibrationVibration - The cases are tested using test method D-999 to determine the ability to withstand the repetitive shocks occurred during transportation of loose loads. ASTM D-4169 DC-18Level 1, Schedule H Environmental Hazard RainfallSimulated rainfall for 2hrs at a rate of 10cm/hr (4”). Samples were conditioned to -20 degrees C and +52 degrees C. MIL-STD-810FMethod 512.4Immersion - The case is submerged in a basin of water to a depth of 1 meter (3.28 ft) to the top most part of the case for 30 minutes. The case is heated to 10 degrees F higher than the temperature of the water.IP 67 ingress protection6- Total protection from dust7- Protected against the effects of immersion between 15cm (5.9”) and 1m (39.37”)