U-Reach USB3.1 USB Drive 1 to 3 Portable Copier

OVERVIEWS Features Read/Write speed inspection/Actual capacity inspection/ Bad sector inspection Maximum copying speed of one single port can be up to 16GB/min (266 MB/sec). In-built H2 and H5 Read/Write speed inspection, actual capacity inspection, and bad sector inspection Supports bit-by-bit copy for all formats, including proprietary and unknown formats. Compatible with USB 2.0/3.0/3.1. Lightweight and portable design. Impeccable High SpeedHighest speed USB Duplication /Inspection Equipment in the industry.  Maximum copying speed of one single port can be up to 16GB/min. Intelligent Copy Option Systems and Files (Quick Copy Mode) 1. The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.  2. This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to "whole media copy" mode. Whole Media 1. The duplicator copies from the initial sector to the end, bit by bit. 2. There is no format limitation in this mode. Quality Inspection H2 Read/write speed inspection： In-built H2 read/write speed inspection test which is being widely used in the industry. H5 Read/write speed inspection：the strictest quality inspection by writing into and reading the flash memory. * Can set the area in the NAND flash to be inspected, read/write speed filtering, or bad sector inspection. TECH SPECS General Model USBA1 Target 3 Specification Maximum Transfer Speed 16GB/min. *Actual performance is dependent on device transfer speeds* Capacity Supports the largest sized devices available on the market. Operating Type Stand-alone, FPGA-based operation (Non PC-based) Supported Languages English, Japanese LCD Display Backlit Monochrome LCD Display LEDs  3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail) Control Panel 4 Push Buttons(▲, ▼, OK, ESC) Features Copy Modes  Quick Copy (System & Files): Supports Windows, Mac, and Linux. Whole Media: Copies bit-by-bit regardless of format and data type. Compare Function Bit-by-bit data comparison Sanitization Modes Quick Erase, Full Erase, DoD Erase Compatibilities Compatible Devices USB1.1/2.0/3.0/3.1 devices and USB-HDDs Compatible Devices (with required adapter) eUSB (USB DOM) 2.54mm and 2.00mm Supported Formats Quick Copy Function: FAT16/32/64, Windows (NTFS), Linux(Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).Whole Device Copy Function: All Formats, including proprietary formats.GPT, MBR, and Advanced Formats Supported O/S All (Windows, Mac, Linux, and other stand-alone systems) Hardware specification Power Supply Power Adapter Output: 12V 5A Adapter Working Temperature 5°C ~ 45°C (41°F ~ 113°F) Storage Temperature -20°C ~85°C (-4°F ~ 185°F) Working Humidity 20% ~ 80% Storage Humidity 5% ~ 95% Product Dimensions 4.65 in. x 5.91 in. x 1 in. Weight (lbs) 1.5 lbs. Certifications FCC, CE, REACH Compliance NIST SP 800-88r1, ISO 27000 USER MANUAL Title USB3.1 Carry Flash Duplicator & Tester(USB/USB-HDD)User Manual vA.03 Download Here