Seco-Larm - 2-Channel RF Receiver - 11~24 VAC/DC - 315MHz - Two Relays

5 Programmable output modes: 4-Second momentary, toggle, latch, validity (receiver outputs for as long as the transmitter button is pressed), 1-second momentary New! 2 Independently programmable channels Compatible with all 315MHz ENFORCER transmitters Use to control garage door opener, house lights, alarm control panel, or other devices via remote control Two Form C dry relay contact (NO/NC/COM) outputs. Rated 10A@24VDC Frequency 315MHz. 433MHz This revolutionary receiver incorporates: --1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals. --2.HIGHER SENSITIVITY for greater operating distances. --3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted. --4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared 2 Mode switches (one for each channel) for easy transmitter learning Learns up to 30 transmitters (15 for each receiver channel) Screw terminals for simple connection Accepts ENFORCER fixed code or CODEBUMP transmitters Operating voltage 11~24 VAC/VDC Range Up to 500' (150m) with SECO-LARM transmitter. Range will vary Output Mode 4-Second momentary, toggle, latch, validity, 1-second momentary Current Draw 8mA@12VDC (standby), 30 mA per channel at 12 VDC (activated) # of Stored Transmitter Codes 15 per channel, 30 per receiver Extended Range Antenna Compatible Yes (SK-91ERSD) Compatible Transmitters Fixed Code: 68 Billion codes, CODEBUMP: 18 Quintillion codes Connectors 8 Quick-connect screw terminals (+, -, with NO/NC/COM for channel 1 and NO/NC/COM for channel 2) Dimensions 3-1/8" x 2-9/16" x 1" (80 x 65 x 25 mm) Receiver Outputs Two Form "C" dry relay contacts (N.O./N.C./COM); 10A@24VDC