Seco-Larm - Access Control Digital Keypad - 1000 Users - Weatherproof - Vandal Resistant - Flush Mount

tbody > tr > td:first-child { font-weight: bold;}--> 12~24 VAC/VDC auto-adjusting operation Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2 Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours) Output #1: Form C relay, 1A@30VDC max. Output #2: Transistor ground, 100mA@24VDC Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours) Tamper output: N.C. Dry contact, 50mA@24VDC max Mounts to standard single-gang back box IP66 Weatherproof rating Keypad illuminates when a button is pressed; backlight can be programmed for FULL or AUTO in standby mode All features are programmed directly from the keypad: No need for an external programmer EEPROM Memory protects programmed information in case of power loss Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2 Duress code signals a silent alarm if an authorized user is forced to open the door under duress Egress input lets users exit the premises without keying in the code Door sensor input for anti-tailgating operation Interlocking input for connecting to a second keypad Operating Voltage 12~24 VDC/VAC Current Draw - Standby 15mA@12VDC Current Draw - Keypress 40mA@12VDC Current Draw - Output 1 Active 65mA@12VDC Current Draw - Output 1 & 2 Active 66mA@12VDC Current Draw - Total Max 100mA@12VDC Output- #2 Transistor Ground 100mA@24VDC Output 1 1A@30VDC Output - Duress 100mA@24VDC Output - Interlock 100mA@24VDC Output- Tamper 50mA@24VDC IP Rating IP66 Input - Egress N.O. Ground Input - Door Sensor N.C. Ground Input - Door Inhibit N.O. Ground Operating Temperature -4°~158° F (-20°~70° C) Operating Humidity 5~95% Non-condensing Dimensions 4-3/4"x3-1/8"x1-13/16" (120x80x46mm) Weight 16.2-oz (300g) Downloads: Datasheet Manual