XTOOL - KS-1 - Toyota Smart Key Emulator - AutoProPad

The KS-1 is a smart key emulator for 40-bit Toyota, Lexus & Scion systems. It can read and store the vehicle’s immobilizer data through any AutoProPAD FULL   AutoProPad G2   or AutoProPad G2 Turbo programming device, then write it to the KS-1 and emulate a programmed master key. The emulated “key” will allow you to switch the ignition on, so you can start the vehicle and perform active diagnostics. It will also serve to bypass the 16-minute immobilizer reset when programming an additional car key. Works for all AAB, AEM, and ACX Toyota/Lexus/Scion smart keys Requires internet connection Requires KC100 or KC501 Key Type Tested Already: NO. Vehicle Year Key Type Support or Not Remarks 1 RAV4 2015 88 Yes   2 Alphard 2013 94 Yes   3 Alphard 2015 A9 Yes   4 Previa 2008 94 Yes   5 Crown 2010 98 Yes   6 Crown 2015 A8 Yes   7 Crown 2016 A8 No After 2016,Toyota Crown is not supported 8 Prado 2011 98 Yes   9 Previa 2013 94 Yes   10 Reiz 2011 98 Yes   11 Innova   39 Yes The car is being tested for the Indian Tango   Specifications: Parameter Index Battery CR2025 3V 165mAh Standby current Standby current≤2μA Reading and writing frequency 125kHz Status Indicator Lamp 1pc (mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading) Update The simulation card firmware can be updated  with KC100 Working temperature -20℃~60℃ Storage temperature -20℃~70℃ Structure size 66mm*40mm*12mm