Kysan 1124090 Nema 17 Stepper Motor *Wrong Casing, No Connector* CLEARANCE

This motor is being sold on clearance due to a change made during production to the motor casing. Motor was assembled with a different casing than our standard Kysan 1124090. Also, these motor wires have a raw end, with no connectors (please see below links to DIY connectors/housings kits). Motors are labeled as Kysan SKU #1124090, and match all specifications other than case design and lack of connector.This stepper motor is a strong choice for any project. 5 motors needed for Prusa Mendel.4 needed for OG Mendel.Specifications:    Holding Torque:  5.5Kg.cm    Rated Voltage:  4.2V    NO.of Phase:  2    Step Angle:  1.8° ± 5%    Resistance Per Phase:  2.8Ω± 10%    Inductance Per Phase:  4.8mH± 20%    Current Per Phase:  1.5A    Shaft:  5mm diameter w/ one flat    Insulation Class:  Class B    Dielectric Strength:  100Mohm    Operation Temp Range:  -20 ~ +40° C    Lead Wire:  22AWG / 750mm    4 pin 2.54mm connector Data sheet available here. ***Please note, data sheet specs should be identical for this motor, other than casing and lack of connector. Available DIY connectors and housings kits:2.54mm 1x4 Connector & Housing Kit - 5 pack *Compatible with RAMPS controller*2.54mm 1x4 Connector & Positive Latch Housing Kit - 5 pack *Compatible with RAMBo / Mini-Rambo controller*