Talon 1400 UAV Drone

      Introducing Flighttory UAV Talon 1400 Ursa Aerospace Talon 1400  Talon 1400 – High-performance 3D printed UAV with up to 4-hour flight time and versatile customization --- Specifications --- Wingspan 1305mm Length 830mm AUW 1500-3300g Optimal Speed 55-65 km/h Material LW-PLA + PETG   General Data This is only for a printed airframe ready for the end user to add all the hardware. All airframes are made to order and carry a lifetime no fault warranty from any defects or you crash it ursaaerospace has you covered To only the original purchaser. Introducing Talon 1400 - Your Ultimate 3D Printed UAV. Experience the perfect blend of compactness and outstanding flight performance with our Talon 1400. 3D Printed plane designed for maximum flight optimization, it boasts ample space for a large battery pack and extra equipment while maintaining modularity. Crafted with precision through CFD analysis and real-world flight testing, the Talon 1400 offers up to an impressive 4-hour flight time when equipped with a large Li-Ion 4S6P battery. Accessibility is a breeze for all, and versatility is key, allowing you to adapt to various equipment options. Tailored to your preferences, this aircraft comes with two tail variants to accommodate popular motor sizes, letting you choose the perfect fit for your needs. Moreover, the nose section offers two configurations: one with a VTX and a 19x19mm FPV camera or a sleek, clean option with just the FPV camera. the Talon 1400's adaptability ensures you're always ready for your next flight mission. The geometry is designed to provide the best possible characteristics. Eppler E205 airfoil was selected. The shape of the wing and the V-tail stabilizers, as well as their mutual position and incline angles, were optimized to ensure high performance as well as longitudinal stability. At around zero AOA, the aircraft shows no pithing moment. Optimal aerodynamic performance is in the limit from 0 to 2 degrees of AOA and at speeds from 55 to 65 km/h. With a proper center of gravity position of 63mm from the leading edge, the aircraft does not require any trim, and its natural stability allows it to fly in manual mode as well, or without a flight controller. Required accessories: ITEM QUANTITY 10x530mm Carbon Tube (MAIN SPAR) link / link 2 6x400mm Carbon Tube (SECOND SPAR) link / link 4 4x175mm Carbon Tube (VTAIL SPAR) link / link 4 Thin CA Glue link 20g tube CA Activator link 1 (optional but useful) M3 Threaded Insert link 20 M3 screw 20 LW-PLA link / link 1 roll PLA / PETG link Small amount Polyester hinge 20x25mm e.g. link 12 Velcro strap link 2 Servo extension cable link 2 (optional) Control Horn link 4 Pushrod e.g. link / link   4   Reccomended electronics: Motor 2830 1200KV Prop Drive / 4108 620KV link/ link Propeller 10x5 (2830 Motor) / 12x10 or 13x8 (4108 Motor) link / link / link Flight Controller Speedybee F405 Wing or any other Mavlink FC link / link GPS Matek M10Q or similar GPS with compass link Servos 4x Corona 929MG Metal Gear or similar link/ link ESC BlHeliS 30-40A link Battery 4S (max 4S6P 21Ah Li-Ion) or smaller pack / similar LiPo link Receiver Matek R24-D ELRS or similar link FPV Camera + VTX Walksnail Avatar or any digital or analog link/ link FPV Goggles Walksnail Goggles X or any other matching the chosen VTX link Gimbal Caddx GM3 or twin models for other FPV systems link