Fast Infusion Resin (1 gallon kit)

FAST INFUSION EPOXY – A-298/B-224  Fast Infusion Epoxy is a two-component, very low viscosity system developed specifically for use in resin infusion and VARTM processes.  Fast Infusion Epoxy was formulated to provide for rapid saturation of carbon fiber laminate, fiberglass, and Kevlar.  Processability parameters are enhanced due to Fast Infusion Epoxy’s low mixed viscosity and wet-out potential.  This system is not designed to be used in open mold applications. STORAGE INFORMATION  The storage temperature of Fast Infusion Epoxy will greatly affect the ease of mixing, application and, curing time. For best results, Fast Infusion Epoxy should be stored at (60-80 °F or 16-27 °C) for at least 24 hours before use.  MIXING INFORMATION  Mix RESIN WITH (hardener) for 3 minutes using a Jiffy Mixer and a slow speed drill. Mix at slow speed (less than 500 rpm) to avoid air entrainment.  When adding part B to part A, be sure to scrape the sides of the hardener (part B) container in order to remo