ViewSonic 27" Full HD 1080p LED Monitor with DVI and VGA Inputs - Certified Refurbished

ViewSonic VA2746M-LED-S 27 Inch Full HD 1080p LED Monitor with DVI and VGA Inputs - Certified RefurbishedDescriptionThe VA2746M-LED 27" Widescreen LCD Monitor from ViewSonic comes complete with a Full HD 1920 x 1080 resolution, a 3.4 ms response time, 1,200:1 contrast ratio, and a brightness rating of 300 cd/m². Utilize either the DVI-D or VGA inputs to connect this display to a variety of PC configurations. Additionally, the monitor is VESA compatible allowing you to mount it to the wall or attach the included stand. Once set up, you can view the display from nearly any perspective as it supports 170° horizontal and 160° vertical viewing angles.Features 27" Widescreen LED Backlit Display 1920 x 1080 Resolution 1,200:1 Contrast Ratio 300 cd/m² Brightness 3.4 ms Response Time 2 x 2 Watt Speakers DVI-D & VGA Inputs Full 1080p Performance The VA2746M-LED features a Full HD 1080p 1920x1080 resolution for enhanced pixel-by-pixel image performance. Additionally, the 16:9 widescreen ratio minimizes eye fatigue even after hours of viewing and is compatible with multi-window viewing without toggling. MEGA Dynamic Contrast Ratio Dynamic contrast ratio detects the brightness of an image, and automatically adjusts the backlight to maximize the monitor's color range and contrast. Dynamic contrast ratio technology enables the accurate reproduction of images. LED Technology This monitor uses white LEDs (Light Emitting Diodes) as the light source. LEDs provide a variety of benefits, including about 50% less power consumption compared to a traditional CCFL monitor, as well as an environmentally friendly mercury-free backlight, a low EMI (Electro Magnetic Interference), and all in a slimmer and lighter monitor. Energy savings may vary based on cost, actual usage, and other factors ENERGY STAR Certified With its mercury-free backlight and low energy consumption, the ENERGY STAR certified VA2746M-LED saves on your electricity bill. Eco-Mode Conserves More Energy ViewSonic's proprietary Eco-mode function is built into all LED displays, offering options to "optimize (65%)" or "conserve (50%)". Both modes reduce display brightness and conserve up to 25% energy. Especially in low ambient light, Eco-mode adjusts brightness and improves visibility while reducing eye fatigue and prolonging the display's lamp life. Energy savings may vary based on cost, actual usage, and other factors Dual Integrated Stereo Speakers The ViewSonic VA2746M-LED has two integrated 2 watt stereo speakers for enhanced multimedia performance with crystal-clear stereo sound. VESA Mountable The VA2746M-LED features a 100 x 100mm VESA-mountable design that allows you to take the monitor off the stand and mount the display on a wall. You can easily detach the base by unscrewing four screws and then mounting the display on its new stand or wall mount.Specifications LCD   Type Color a-Si TFT Active Matrix LCD Display Area (HxV) 23.5 x 13.2" / 59.69 x 33.53 cm vertical   27" / 68.58 cm diagonal Resolution 1920 x 1080 Contrast Ratio (Typical) 1,200:1 Dynamic Contrast Ratio 20,000,000:1 Viewing Angles Horizontal: 170º   Vertical: 160º Response Time 3.4 ms Backlight Life 30,000 hours (min) Brightness 300 cd/m² Panel Surface Anti-glare, hard coating 3H scratch resistant Video Input   Analog/Digital RGB analog (0.7 / 1.0 Vp=p. 75 ohms) / DVI (TMDS, 100 ohms) Frequency Fh: 24~82 kHz   Fv: 50~75 Hz Sync Separate Sync Compatibility   PC PC compatibles (VGA up to 1920 x 1080 non-interlaced) Mac Up to 1920 x 1080 Connectors   Analog/Digital 15-pin mini D-sub (VGA) / DVI-D (V 1.3 with HDCP) Audio Input 3.5 mm mini jack Power Internal power board, 3-pin plug (CEE22) Audio   Speakers 2 x 2 watt Power   Voltage 100-240 VAC (universal), 50-60 Hz Consumption 38 watt (typical) / 42 watt (maximum) Controls   Basic Controls Power, 1, up, down, 2 OSD Auto Image Adjust, Contrast/Brightness, Input Select, Audio Adjust, Color Adjust, Information, Manual Image Adjust, Setup Menu, Memory Recall (See user guide for complete OSD functionality) Operating Conditions   Temperature 32-104°F / 0 to 40°C Humidity 10 to 90% (non-condensing) Other Specifications   Tilt Forward 5°, back 20° VESA Mount 100 x 100 mm Regulations CE, CB, WEEE, RoHS, REACH SVHC List, TCO5.1, ENERGY STAR 5.0, Windows 8, Window 7, UL, cUL, FCC-B / ICES-003B, TUV-S, Nemko ERGO, GOST-R+Hygienic, UkrSEPRO, ErP, CCC, CEL Level 1, BSMI, PSB, C-tick, KC, e-standby Power Management ENERGY STAR standards Dimensions (WxHxD) With Stand: 25.4 x 17.4 x 9.8" / 645.3 x 442.5 x 247.6 mm   Without Stand: 25.4 x 15.7 x 2.2" / 645.3 x 398.8 x 55.9 mm Weight With Stand: 11.6 lb / 5.3 kg   Without Stand: 10.7 lb / 4.9 kg Packaging Info   Package Weight 15.1 lb Box Dimensions (LxWxH) 28 x 21 x 6"