Saros® In-Ceiling Tile Loudspeaker (must be ordered in multiples of two)
The Saros ICT5T-12 is a 1 ft x 2 ft ceiling mount loudspeaker designed for multimedia presentation and speech reinforcement in classrooms, meeting spaces, and most indoor distributed sound system applications. It features a coaxial 5 in. two-way driver in a low profile enclosure that’s ideal for use in plenum spaces that are packed with preexisting systems and utilities, leaving limited space for ceiling loudspeakers. A built-in 16 W multi-tap transformer allows for use with 70 and 100 V distributed speaker systems. Drop-in simplicity affords fast and easy installation in a typical 2x2 or 2x4 ft suspended ceiling grid with 15/16 in. face profile.The Saros ICT5T delivers exceptional sound quality with wide dispersion for the greatest area of coverage. The coaxial two-way loudspeaker delivers exceptional intelligibility through the voice band. Announcements will be clear and natural sounding, and will cut through typical background noise in busy environments. Applications requiring music program will deliver full-bodied sound. The high power handling enables the loudspeaker to be mounted into tall suspended ceilings where greater volume levels are required to reach the target SPL for the listeners.Saros ICT5T speakers are UL® 1480A and UL 2043 listed1 for use in plenum air return spaces. Saros ICT5T speakers are priced individually and sold in pairs. Key Features Full-range 5 in. suspended ceiling mount loudspeaker 4 in. low profile height can be installed in a crowded plenum space Easy drop-in installation for 2x2 and 2x4 ft ceiling grids Fully-enclosed plenum-rated housing Finely-perforated white metal grille Cross tee accessory provided for 2x2 and 2x4 ft applications Five seismic attachment points 30 W power handling in low impedance mode 70 Hz to 18 kHz frequency response Built-in 70/100V multi-tap transformer, with 8-ohm bypass Specifications Performance Transducers 5 inch woofer with dome tweeter Beamwidth 120° Impedance 8 Ohms nominal with transformer set to "8-ohm" Frequency Range 70 Hz to 18 kHz (+3/-10 dB) Transformer Taps 1 W, 2 W, 4 W, 8 W, 16 W @ 70 V;2 W, 4 W, 8 W, 16 W @ 100 V;Selectable with rotary knob Power Handling 30 W for LoZ operation Nominal Sensitivity 90 dB at 1 W/ 1 m Connections Input (1) 4-pin 5 mm detachable terminal block;Speaker input with parallel pass-thru;Maximum Wire Size: 12 AWG Controls Transformer Tap (1) Rotary knob on plenum side of the loudspeaker enclosure;Used to select 70/100 V tap or 8 Ohms (bypass) Environmental For indoor use only Construction Enclosure Steel, painted black with 5 tether attachment points Baffle Steel, painted black Grille Steel, painted white Installation Lays onto suspended ceiling grid;Ships with 1 cross tee accessory per loudspeaker, 24 in. length, 15/16 in. face profile, staked-on end clips. Two cross tees per box. Dimensions Height 4.00 in Width 11.88 in Depth 23.75 in Weight 8.4 lb (3.8 kg) Compliance UL 1480A, UL 20431