Viking 40-IP IP Ceiling Speaker for SIP Endpoint Paging or Multicast Paging / Background Music
The 40-IP Ceiling/Wall Speaker enables SIP endpoint paging and also allows for standard paging and background music via multicast. Viking 40-IP Features: Connects with a single CAT5/6 cable from your PoE switch PoE powered ((class 3, <13 Watts) Paging prioritization Plays audio from multicast SIP endpoint or multicast group member Supports up to 10 multicast paging groups Blue paging status LED indicator SIP compliant Autoprovisioning via Viking programming software Built-in high efficiency 4 watt class D amplifier SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive Support for access code to prevent unwanted SIP calls Line-level audio output for connecting to an external amplifier Network remote speaker volume control Can drive additional external analog speakers for greater coverage Mounting: Blind mounts into 9.5” hole, clearance requirement of 3.45” (87.3mm) above 1/2” gypsum board ceiling Heavy duty back box protects speaker and circuitry from plenum dust Viking 40-IP Applications: Amplified SIP endpoint or multicast IP paging for: schools hospitals retail stores office spaces, etc. Provide background music and sound masking Add programmable secure relay control with optional RC-4A Viking 40-IP Specifications: Power: PoE class 3 (<13 Watts) Overall Dimensions: 11″ x 11″ x 4″ (279mm x 279mm x 102mm) Back Box Dimensions: 9.25″ x 9.25″ x 3.45″ (235mm x 235mm x 88mm) Shipping Weight: 5.0 lbs (2.27 kg) Operating Temperature: -40°F to 140°F (-40°C to 60°C) Humidity: 5% to 95% non-condensing Audio Codecs: G711u, G722, and G711a (SIP only) Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over Maximum Output Level: 105 dB SPL @ 1M (with no additional speakers connected) Amplifier: 6 Watt class D (capable of driving up to five additional 8 Ohm speakers connected in parallel) Connections: (1) RJ45 10/100 Base-T, (4) cage clamp screw terminals on pluggable connector PC Requirements: IBM compatible personal computer with: Windows 7, 8 or 10 Adobe Acrobat Reader 8 or higher 40-IP hardware Available LAN with PoE (class 3, Ethernet cable (CAT5 minimum) 1 MB minimum free hard drive space for installation 16MB of free physical RAM VoIP SIP System Compatibility List: On Premise 3COM VCX 3CX Allworx Aastra Asterisk Atcom Avaya Aura Platform Avaya IP Office Platform BlueBox Brekeke Cisco Unified Communications Manager (CUCM)* Cisco Unified Communications Manager Express (CUCME) Elastix epygi QX200 Freeswitch Grandstream* Interactive Intelligence iPECS (Ericsson-LG) Iwatsu ECS Kamailio Mitel 3300 NEC OfficeSIP OpenSIPS Panasonic** (with SIP Extension Card) PolyCom Samsung Communications Manager (SCM) ShoreTel Siemens Communications Server (SCS) SIP Express Router (SER) Snom PBX Sonus Switchvox Teksip Toshiba Vertical Wave* Yealink T Series S IP Phones Cloud Based Service Provider: Callcentric iptel.org MetaSwitch Ring Central sip.antisip.com Switchvox unify Vertical Wave Voice Carrier VoIP.MS Wildix ** Note: Relay operation commands are NOT compatible with Panasonic Phone Systems (Panasonic does not transmit DTMF between station ports)