Viking BLK-4 Line Status LED Strobe / Beacon Light Kit Mass Notification System

Viking BLK-4 Features: The BLK-4 provides high visibility indication of analog line status through a high powered 360º LED strobe and/or beacon visual indicator The BLK-4 is the ideal solution for the hearing impaired and can be used equally well in loud warehouses or factories, where ringing phones cannot be heard Alternatively, the BLK-4 can be used to add emergency notification to pre-existing emergency phones by turning on the strobe light when the emergency phone is in use Monitors analog lines for ringing and/or off hook Disable input, ideal for use with two-button emergency phones like Viking’s E-1600-20A - Will not activate strobe light on “Info” calls For use with Viking emergency phone or any analog phone Durable polycarbonate lens High output long life LED technology Four programmable flash patterns: Single Flash Double Flash Quad Flash Flicker Flash 6 programmable beacon and strobe brightness settings Immune to shock and vibration Flush mount or surface mount with weatherproof single gang box (included) 3/4” knockouts for connecting conduit, etc. Strobe and control module may be installed separately Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure One set of (NO) normally open and (NC) normally closed relay contacts provided Selectable ring cadence mode (strobe light will remain flashing between rings) Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.) On/off switches for ring detection and off-hook/loop detection Strobe Dimensions: 4.38" Diameter x 2.75" Control Module Dimensions: 2.9" x 2.1" x 1.0” For Enhanced Weather Protection version see BLK-4-EWP Manufacturer Warranty 2 Year Limited Warranty Package Contains: (1) Control Module (1) SL-2 Blue LED Strobe Light (1) 12V DC Power Adapter (16) Gel-filled Butt Connectors (1) Single Gang Weatherproof Mounting Box with Gaskets and Hardware Viking BLK-4 Applications: Ringing phone or TTY indication for the hearing impaired Ringing phone indication in loud warehouses and factories Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc. Alarm indication for security systems or alarm panels with phone dialers Viking BLK-4 Specifications Power: 120VAC / 12VDC 500mA UL listed adapter provided Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft 2 pair = 225 ft 3 pair = 325 ft 4 pair = 475 ft Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft 6 wires = 300 ft Strobe Dimensions: 4.38″ diameter x 2.75″ (111mm diameter x 69mm) Control Module Dimensions: 2.9″ x 2.1″ x 1.0″ (74mm x 53mm x 25mm ) Operating Temperature: -15°F to 130°F (-26°C to 54°C) Humidity: 5% to 95% non-condensing SPDT Relay Contact Rating: 1A @ 30VDC / 0.5A @ 125VAC, 250VAC maximum Minimum Loop Current: 15mA Minimum Ring Voltage: 25VRMS REN: 0.5A Disable / Info Switch Input: 50mA / 80mW maximum Strobe Flash Rate: 60 flashes per minute (default) Maximum Strobe Light Output @ 15VDC: Clear lens: 323 lumens Amber lens: 242 lumens Blue lens: 116 lumens Red lens: 66 lumens Mounting: Fasten to wall, post, etc. with included surface mounting hardware Connections: Color coded wires with (16) gel-filled butt connectors