Viking CTG-2A Networked Clock Controlled Tone / Message Generator and Master Clock

Viking’s model CTG-2A is a networked clock controlled tone/message generator designed to provide accurately timed tones and/or messages over your existing paging system. This provides a cost effective way of signaling school period changes, factory shifts, breaks, lunch periods, etc. Viking CTG-2A Features: Up to 14 Schedules and up to 1,000 Events 6 minutes of CD quality WAV file record time Up to 14 different tones or messages 4 programmable trigger inputs for emergency tones, etc. Automatic day light savings time and leap year correction Programmable NTP Clock synchronization PC programming software included RS485 clock SYNC terminals for remote Master Clock control of Viking CL Series RF synchronized clocks Non-volatile memory with 4 day clock back up Factory loaded with school/factory tones and evacuation signals (ANSI S3.41), etc. Remote program via TCP/IP network Page trigger outputs (12VDC and DPDT relay) Programmable Auxiliary relay contacts (DPDT) 24 hour digital clock displays hours & minutes One mono line level pre-amp input and audio output Built-in 2 watt mono audio amplifier One isolated audio output for PABX / dial access paging Master volume control Programmable volume control per tone/message Time base selection: Network, 50/60Hz or internal Programmable message repeat count for trigger inputs Internal Clock Backup Time: 4 hours Dimensions: 210mm x 159mm x 45mm (8.25” x 6.25” x 1.75”) Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity Preamp (Audio 1/2) Output: 6V RMS across 600 ohms Paging Amplifier Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm speakers Sound Pressure: 100 dB @ 1 meter (loud electronic warble from 25AE paging horn) Viking CTG-2A Applications: Signal the beginning and end of class periods, breaks and lunch periods for schools Signal the beginning and end of shifts, breaks and lunch periods for factories/businesses Provide trigger controlled emergency alert messages for fire, flood, severe weather, lock down, etc. Provide messages at specific times for store sales, promotions, closing times, etc. Provide Auxiliary contact activation at specific times for specific durations for controlling lights, cameras, unlocking doors/gates, etc. Viking CTG-2A Specifications Power: 120VAC / 13.8VAC 1.25A UL listed adapter provided Maximum Current Draw: 650mA Dimensions: 8.25″ x 6.25″ x 1.75″ (210mm x 159mm x 45mm) Operating Temperature: 32°F to 90°F (0°C to 32°C) Humidity: 5% to 95% non-condensing Preamp (Audio 1 / Audio 2) Output: 6VRMS across 600 Ohms Paging Amplifier Output: 1 Watt – powers up to (2) 8 Ohm or (12) 45 Ohm speakers Sound Pressure Level: 85dB @ 1 meter (loud electronic warble from 25AE paging horn) Maximum Speaker Output Wire Run: 300 ft (91m), 18AWG Maximum Load on Page Trigger Output: 750 Ohm (15mA) WAV File Resolution: 16 bit or 8 bit WAV File Sampling Rate: 44.1K (90 seconds total) 22K (3 minutes total) 11K (6 minutes total) Time Base: 50 / 60 Hz or internal with NTP clock sync Internal Time Base Accuracy: +/- 2ppm (63 seconds per year) without network time sync or manual adjustment Internal Clock Backup Time: 4 days DPDT Relay Contact Rating: 1A @ 30VDC / 0.5A @ 125VAC, 250VAC maximum Connections: (1) RJ45 network jack, (29) cage clamp screw terminals