Viking K-1775-3 Stainless Steel Handsfree Video Entry Phone with Built-In Keypad and Proximity Card Reader
The Viking K-1775-3 Series entry phones provide a tough and attractive handsfree phone for apartment, and residential door entry or applications requiring a vandal resistant VoIP speaker phone with built-in proximity card reader and Analog Color Video Camera. View IP SIP System: Compatibility List Viking K-1775-3 Features: Built-in high resolution analog NTSC color video camera with wide viewing angle tilt/swivel adjustments and wide operating temperature of -40°F to 140°F Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal keypad and “Call” button and T-10 Security Torx drive mounting screws Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch Switch internally sealed per IP67 Mylar speaker, Self-draining mic mount, Faceplate, mic and speaker gaskets Compatible with the following Viking proximity cards and fobs: PRX-C, PRX-C-ISO and PRX-FOB Available in 2 standard faceplate finishes: 316 brushed stainless steel with laser etched graphics or oil rubbed bronze powder paint with copper metallic graphics Two sets of SPDT 2 Amp relay contacts for door/gate or camera control Optional RC-4A for Secure Remote Relay Control Blue “Call /Status” LED indicator SIP compliant (see pg 2 for list of compatible IP-PBX phone systems) PoE powered (class 2, <6.5 watts) Automatic Noise Canceling (ANC) feature for proper operation in noisy environments Network downloadable firmware Programmable to speed dial up to 250 numbers Cycles to roll over phone number on busy or no-answer Program up to 1,000 keyless entry codes and/or proximity card numbers Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week Call logging with time and date stamp Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating Hangs up on busy signal, time-out or touch tone command Extended temperature range (-40°F to 140°F) Volume adjustments for microphone and speaker Selectable auto-answer feature for monitoring Zinc plated steel rough-in box included Optional VE-6X7 Surface Mount Box available Optional VE-LIGHT kit to illuminate the front panel at night Self diagnostic reports via email (testing com, mic, speaker & switch) Specifications: Power: PoE class 2 (<6.5 watts) Dimensions: see Installation and Specifications Operating Temperature: -40° C to 60° C (-40°F to 140°F) Humidity - Standard Products: 5% to 95% non-condensing Humidity - EWP Products: Up to 100% Audio Codecs: G711u, G711a, G722 Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over Connections: (1) RJ45 10/100 Base-T, (10) gel-filled butt connectors