Viking SR-IP SIP Audible Ringer with Visual Ring Indication and Remote Strobe Light Control
Viking SR-IP Features: Loud Ringer for noisy or variable noise environments (offices, classrooms, factories) Visual Ring Indicator for quiet areas (Hospitals, Church, Theater) Programming software included Bright red visual ring indicator LED SIP compliant (see pg 2 for list of compatible IP-PBX phone systems) PoE powered (class 2, Automatic Gain Control (AGC) to automatically increase ring volume to compensate for ambient noise Network downloadable firmware Surface mounts to a single gang or 4” x 4” electrical box or directly to a wall or post Remotely programmable Extended temperature range (-40°F to 140°F) Remotely adjust ringer volume Four programmable ring cadences: normal (2 sec ON / 4 sec OFF), double, short-short-long, short-long-short 2 Amp relay contacts for Viking LPL-1 or SL-2 strobe light control Optional LPL-1 Remote Visual Ring Indicator Optional SL-2 or BLK-4-EWP strobe light kit available VoIP SIP System Compatibility List: On Premise 3COM VCX 3CX Allworx Aastra Asterisk Atcom Avaya Aura Platform Avaya IP Office Platform BlueBox Brekeke Cisco Unified Communications Manager (CUCM)* Cisco Unified Communications Manager Express (CUCME) Elastix epygi QX200 Freeswitch Grandstream* Interactive Intelligence iPECS (Ericsson-LG) Iwatsu ECS Kamailio Mitel 3300 NEC OfficeSIP OpenSIPS Panasonic** (with SIP Extension Card) PolyCom Samsung Communications Manager (SCM) ShoreTel Siemens Communications Server (SCS) SIP Express Router (SER) Snom PBX Sonus Switchvox Teksip Toshiba Vertical Wave* Yealink T Series S IP Phones Cloud Based Service Provider: Callcentric iptel.org MetaSwitch Ring Central sip.antisip.com Switchvox unify Vertical Wave Voice Carrier VoIP.MS Wildix ** Note: Relay operation commands are NOT compatible with Panasonic Phone Systems (Panasonic does not transmit DTMF between station ports) Viking SR-IP Applications: Audible / Visual Ringer for variable noise environments: Offices Classrooms, etc. Visual Ring Indicator for quiet areas: Hospitals Churches Theaters, etc. Viking SR-IP Specifications: Power: PoE class 2 (<6.5 Watts) Shipping Weight: 1.5 lbs (0.75 kg) Dimensions: 5.5″ x 4.5″ x 1.5″ (140mm x 115mm x 38mm) Operating Temperature: -40°F to 140°F (-40°C to 60°C) Humidity: 5% to 95% non-condensing Maximum Sound Pressure: 93dB SPL @ 1m SPDT Relay Contact Rating: 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum Audio Codecs: G711u, G711a, G722 Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors Viking SR-IP Certifications SIP