Arducam 13MP AR1335 High Quality Camera Module with M12 Mount Lens for Raspberry Pi, and Jetson Nano
Arducam 13MP OBISP MIPI camera features onboard ISP (Image Signal Processor), it uses standard Raspberry pi 15pin MIPI CSI-2 interface, and works seamlessly on Raspberry pi, Jetson Nano, and can also be ported to other platforms which compliant to MIPI CSI-2 interface protocol. ★ KERNEL CAMERA DRIVER USED This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you’ll need to re-install a matching driver. Application Cellular phones Digital still cameras PC cameras IoT cameras Features Resolution: High Resolution Shutter Type: Rolling Shutter Color Type: Color IR Sensitivity: 650nm IR filter, visible light only. Output Interface: 2-Lane MIPI CSI-2 Output Format: YUV422, RGB888 ISP Features: AWB, AE, Flip, Mirror, DeNoise, Gamma, Sharpness, Saturation, Contrast Digital Zoom, Digital Pan/Tilt, Speical Effects etc Platform Support: Raspberry Pi, Jetson Nano or platform with MIPI CSI-2 interface Specs Sensor Type: 13MP AR1335 Pixel Size: 1.1um x 1.1um Resolution: 4160×3120 Optical Size: 1/3″ Lens Spec: M12 Low distortion lens, EFL: 4.73mm, FoV(H): 50°, F/NO: 2.2 Max Data Rate: 1.2Gbps/laneFrame Rate: 7fps@4160×3120, 11fps@3264×2448/3840×2160, 24fps@2560×1440, 30fps@1600×1200/1920×1080/640×480/320×240 Responsivity: 4.7k e/lux-sec SNR(Max): 37dB Dynamic Range: 69dB Power Consumption: 270mW Temperature Range: -10 ~ 70 degrees Camera Driver: V4L2 Compliant driver for Raspberry Pi and Jetson Nano Board Size: 38mm x 38mm Powerline Frequency: 50Hz, fixed Package Contents 1pcs Arducam 13MP AR1335 High Quality Camera Module with M12 Mount Lens 1pcs 150mm 15pin flex ribbon cable 1pcs 150mm 15pin to 22pin flex ribbon cable Documentation User Guide-OBISP 13MP Low Distortion Camera Module