Raspberry Pi 3 Model A+

 KITS SHIP FREE!!Check out the kit options for this board via the link below:Raspberry Pi 3 Model A+ Kits The Raspberry Pi 3 Model A Plus is the latest board for the minimalist Pi fan. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.3/BLE. This low-cost Pi uses the same processor as the model 3 B+ but does away with the Ethernet jack and three USB ports. It's still compatible with all Pi operating systems and software, and has the same 40-pin GPIO connector and camera/display sockets, so any HATs or Pi Plates or other things that plug into the model B+ will work just the same.  It also has the same HDMI, sound/composite connector, and microUSB connector for power. Unlike the Raspberry Model B+, there's only one USB port and no Ethernet jack, but it's also significantly smaller at 65mm x 56mm if you don't include an overhang from the connectors. The USB port is set in and sticks up quite a bit compared to the very slim Pi Zero, if you're using HATs or bonnets with the Pi A+ that sit flat, please use some tape or a GPIO spacer to avoid shorts between the USB port and any pads on the bonnet. TECHNICAL DETAILS: Dimensions: 65mm x 56mm / 2.5" x 2.25" Processor: Broadcom BCM2837B0, Cortex-A53 Connectivity: 2.4GHz and 5 GHz IEE 802.11b/g/n/ac wireless LAN, Bluetooth 4.2/BLE Access: Extended 40-pin GPIO header USB: One USB 2.0 Port - Keeping it compact means minifying the footprint as much as possible No Ethernet Port Video + Sound: 1 x full-size HDMI MIPI DSI display port MIPI CSI display port 4 pole stereo output and composite video port Multimedia: H.264, MPEG-4 decode (1080p30) H.264 encode (1080p30) OpenGL ES 1.1, 2.0 graphics Memory: 512MB LPDDR2 SDRAM SD card support: Micro SD format for loading OS and data storage Input power: 5V/2.5 A DC via micro USB  5V DC via GPIO header Operating temperature: 0–50ºC