AC Infinity CLOUDWAY T12 EC Fan, 1600 CFM, with Humidity Controller

AC Infinity CLOUDWAY T12, Whole House EC Fan, 1600 CFM, Energy Efficient with Temperature Humidity Controller Description A whole house fan system designed to be installed in attics to keep homes cool; it exhausts hot air from indoor spaces while creating passive intake to pull in fresh air. Each attic fan is controlled by an LCD digital controller, featuring a smart thermostat with triggers, fan speed control, and status alerts. The fan uses a PWM-controlled EC motor that allows it to run efficiently and quietly at a maximum of 62 dBA. This kit includes 4-layer ducting, stainless steel duct clamps and grille, and a 2-door shutter that blocks attic air from flowing into your home when the fan is not in use. INTELLIGENT CONTROLLER Featuring active temperature and humidity monitoring, the digital controller has programmable triggers that activate the attic fan when your house gets too hot or humid. The fan can run continuously or on a timer to start and stop when you need it to. Set the whole house fan to custom speeds between 0 and 10 to optimize your desired cooling and noise level. Each smart controller includes a 12 ft. corded sensor probe that detects temperature and humidity in your home. Other features include LCD screen energy-saving mode, backup memory, and alert notifications. EFFICIENT PERFORMANCE The PWM (Pulse Width Modulation) controlled motor not only spins the fan quietly, but also consumes up to 95% less power than air conditioner units. The attic fan has a 50,000-hour continuous run lifespan, using dual ball bearings that allow omnidirectional mounting. It is also IP-44 rated to resist dust and moisture while performing in most humid environments. The insulated damper uses gravity-fed shutters that close the opening when the whole house fan is not in use, keeping attic air from entering your home. A whole house attic fan designed to cool and ventilate entire homes by exhausting hot air from indoor spaces. Smart digital controller with temperature and humidity trigger programming, fan speed control, timers, and alarms. Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than most others. Features 2-door shutters with damper that blocks attic air from entering living spaces when fan is not in use. Duct Size: 12” | Dimensions: 12.3 x 17.7 x 14.1 in. | Airflow: 1604 CFM | Noise: 62 dBA | Bearings: Dual Ball TECHNICAL SPECS Product and Mounting Dimensions - Fan Unit    Duct Size    12"    Duct Tube Length    5 ft.    Total Dimensions    12.28 x 17.71 x 14.05 in. (31.2 x 45.0 x 35.7 cm)    Mounting Hole-To-Hole Distance    7.00 x 7.12 in. (17.8 x 18.1 cm)    Screw Hole Size    Ø 0.462 in. (Ø 1.18 cm)    Cord Length to Controller    240 in. (20 feet)    Cord Length to Plug    96 in. (8 feet)    Product and Mounting Dimensions - Controller    Total Dimensions    5.19 x 2.91 x 1.06 in. (13.2 x 7.4 x 2.7 cm)    Hole to Hole Distance    4.71 x 2.64 in. (12.0 x 6.7 cm)    Screw Hole Size    Ø 0.119 in (Ø 0.3 cm)    Display Size    3.5 x 1.4 in. (9 x 3.5 cm)    Sensor Probe Length    144 in. (12 feet)    Product Performance and Technical Specs    Total Airflow    1604 CFM    Total Noise    62 dBA    Static Pressure    818 Pa    Voltage    100-240V AC    Frequency    50/60Hz    Max Power Draw    250 W    Average Power Usage    139 W    Current    2.5 A    Power Connector Type    US Plug (NEMA 1-15 Type-A)    Operating Humidity    35 to 85% RH    Operating Temperature    0 to 140°F    Ingress Protection    IP 44    Fan Bearings    Dual Ball    Mounting Positions    Horizontal or Vertical    L10 Life Expectancy    67,000 Hours    Fan Quality Approvals    CE, RoHS