China XPROG ECU Programmer Device OEM XPROG-M box with USB Dongle

XPROG-M box is an universal car ECU Programmer,supports more than 500 units, V5.70 / V5.60 XPROG box support CAS4 5M48H and new adds other authorization, including:serial EEPROM's,Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).Option: 1. XPROG 5.55.    2. XPROG 5.84.   3. XPROG 6.50.   - About XPROG V5.55 1. V5.55 especially for BMW CAS4 DECRYPTION. Without USB Dongle,software is not encrypted. System Requirement: WIN7 32bits Only (close an-virus program,or software attacked). 2. Add new authorization: AUTH-0025 Authorized 11/4/2014 3. Disconnect the internet when running software,otherwise the device will be damaged. 5. Product can't be updated. 6. Only one xprog version 5.55 software can be placed and installed in the computer, no other xprog software, if there is other software, it will conflict and cause certificate problems! 7. The computer needs to have 2 or more partitions, such as C and D disks. It cannot be an external hard disk, but must be multiple partitions of the computer's hard disk. 8. MUST first install 5.55 registry, then run 5.55 Software. 9. The product cannot open multiple software interfaces at one time, which will cause the product to enter a locked state! ! Because the system will mistakenly believe that you use the product incorrectly or crack the product, resulting in lock-up. 10.After used,close the software and unplug the usb dongle from the computer. 11. XPROG-M V5.55 Authorizations: - AUTH-0001 for Motorola HC05 family authorization (allows to read/write EEPROM) - AUTH-0002 for Motorola HC08 family authorization (allows to read/write EEPROM) - AUTH-0003 for Motorola HC11 family authorization (allows to read/write EEPROM) - AUTH-0004 for Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory) - AUTH-0005 for Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM) - AUTH-0006 for Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory) - AUTH-0007 for ST M35080 authorization. Read/Write/Erase device to delivery state. - AUTH-0008 EWS3 authorization - AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory) - AUTH-0010 for MB ZGS001 authorization - AUTH-0011 for Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory) - AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) - AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) - AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) - AUTH-0018 for Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory) - AUTH-0020 ARM (for Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM) - AUTH-0021 ARM (for Micronas, ...) Family bypass security authorization (allows to read/write secured and unsecured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code). - AUTH-0023-1 MAC7xxx(New added) - AUTH-0023-2 XC23xx(New added) - AUTH-0024-1 MC9S12Cxx(New added) - AUTH-0024-2 MC9S12XE(New added) - AUTH-0024-3 9S12XE SECURITY - AUTH-0024-4 MC9S12HA/HY/P - AUTH-0025-1 MPC/SPC5xxx (newly added) - AUTH-0024-4 MC9S12HA/HY/P - AUTH-0025-1 MPC/SPC5xxx (newly added) - About XPROG V5.84 1. Software version: V5.84. Firmware:V4.4. 2. With USB Dongle. 3. Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9. 4. Language: English Only. 5. Uninstall all of the old version xprog-m or xprog box software, and then install V5.84 software. 6. Close all of the computer anti-virus software and disconnect the internet when run software. 7. Product can't be updated. 8. operation system: windows XP 32bit or windows 7 64 bit, and should be with at least 2 partitions (except the CD ROM.) 9. XPROG-M V5.84 Authorizations: - AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) - AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM) - AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM) - AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory) - AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM) - AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory) - AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state. - AUTH-0008 BMW EWS3 authorization - AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory) - AUTH-0010 MB ZGS001 authorization - AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory) - AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) - AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) - AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) - AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory) - AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM) - AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and unsecured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code). - AUTH-0023-1 MAC7xxx - AUTH-0023-2 XC23xx - AUTH-0024-1 MC9S12Cxx - AUTH-0024-2 MC9S12XE - AUTH-0024-3 9S12XE SECURITY - AUTH-0024-4 MC9S12HA/HY/P - AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13 - AUTH-0027-1 HC(S)908 update Authorized 2016/3/13 - AUTH-0027-2 HC(S)908 security Authorized 2016/3/13 - AUTH-0028-1 Renesas V850 Authorized 2017/10/9 - AUTH-0028-2 Renesas SuperH Authorized 2017/10/9 - About XPROG V6.50 1. Software V6.50 Firmware V6.8. 2. PC Time MUST adjust to Accurate Local Time 3. MUST first install 6.50registry,then run V6.50 Software. 4. Operation system: windows 7 64 bit, and should be with at least 2 partitions (except the CD ROM.) 5.  Close all of the anti-virus software and connect the Internet,use online(But DO NOT UPDATE), and use the English System. 6. After use,close the software and unplug the usb dongle from the computer. 7. PDF MUST update to Newest Version from official site 8. Product can't be updated. 9. Add New Authorization XPROG M Programmer Full Adapters ECU Chip Tuning Tool XProg-M Box V6.50. 10. Added Orange5 V1.36 V850E2.