WakeMAKERS Ballast System Timer Module

The timer is essentially invisible in its operation which means you can use your ballast system exactly like you would otherwise and the Timer Module will automatically turn the pump off to reduce the likelihood of damage. To fill your ballast, put your switch in the Fill position. There will be a 2.5 second delay before the Timer Module will turn the pump on and will run for the set amount of time. Once the time limit has been reached the Timer Module will turn the pump off. To drain your ballast, put the switch in the Drain position and let the Time Module run until it is complete. Timer Module InstallationIncorporating this timer module is quick and simple. The timer is connected in-line with the current wiring harness near the pump. Simply disconnect the plug-and-play connector at the pump, and connect the plug and receptacle to the wires of the Timer Module. You will need a separate timer module for each pump, or zone, that you want to control. Timer Module Compatibility Our