WiFi Robot ESP32 Camera IoT Kit Robot Car ESP32-Cam C++ Programming PDF Tutorial Academy STEM Starter Kit

Description Imagine if you have a robot that has camera on board and can be controlled through the Internet. It would open a lot of opportunities of using it. For example, you could send the robot to the kitchen to check if you accidentally left the kettle on the stove! I found that with ESP32-CAM it can be done easily. The ESP32-CAM is a very small camera development board with an ESP32-S chip, an OV2640 camera, microSD card slot and several GPIOs to connect peripherals. The OV2640 is a 1/4-inch CMOS UXGA (1632*1232) image sensor. The sensor's small size and low operating voltage provide all the features of a single UXGA camera and image processor. (1) Motor parameters: Voltage range: 6-9V, reduction ratio of 48:1. (2) The motor control adopts L298N driver module, which achieves true isolation from MCU. (3) It can be done through the Internet It controls the intelligent car to achieve real-time video monitoring function. (4) The use of an external antenna control board enhances WiFi transmission and reception signals, resulting in more stableperformance. Package List 1 × Black acrylic robot chassis 1 × L298N Motor Drive Module 4 × 5V DC geared motor (with wheels welding wire) 1 × 18650 battery box with switch 1 × ESP32 Cam development board with OV2640 camera module 10 × M3*15 copper pillar 4 × DuPont female to female 20cm 2 × Dupont line male to female 20cm 4 × Motor fixing bracket 16 × M3*10 flat head screws 8 × M3*12 flat head screws 24 × M3 nuts 8 × M3*30 round head screws 2 × M1.6*10 screws 2 × M1.6 nut 4 × M3*8 flat head screws 1 × ESP32(CAM) Car Kit 3 × PE foam sponge double-sided adhesive, strong and high-viscosity foam adhesive (white 24.5*40mm) 1 × Blue driver heat sink small (TMC2100) 1 × ESP32 motherboard shell (black) 1 × Ultrasonic brack