Sublimation sports water bottle (flip top&handle)

Mug heat press settings:- temperature - 380 degrees F- dwell time - 1 - 1:15 minutes- pressure - light to mediumSteps:1. Remove the top of the water bottle2. Position the substrate onto the transfer.3. Tape two ends of the transfer allowing for the gap in the mug press whereit will close.4. Wrap a piece of scratch paper around the transfer and water bottle tapingif necessary.5. Center the water bottle in the mug press.6. Close the mug press using the heat press settings above.7. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.8. Remove transfer and scratch paper.Tips:- If the image of the final product appears light increase the pressure orthe dwell time slightly (10-15 seconds).- If the image on the final product appears blurred or substrate appearsyellowed reduce the dwell time slightly (10-15 seconds).- Too much pressure can cause trapped moisture in the paper to "jet" awaypulling ink with it in a spiked-peaked formation.