Southwire 14-19 SD CU THHN-THWN-MTW-AWM UL/c(UL)

Construction Conductor: Solid sizes #14 AWG - #10 AWG use soft drawn bare copper per ASTM B3. Stranded sizes #14 AWG - #10 AWG use a combination-unilay stranded soft drawn bare copper per ASTM B787. Insulation: Heat and moisture resistant PVC Sheath: Nylon Standards & References ASTM B3 Soft or Annealed Copper Wire ASTM B787 19 Wire Combination Unilay-Stranded Copper Conductors UL 83 Thermoplastic Insulated Wires and Cables UL 758 Standard for Appliance Wiring Material UL 1063 Machine Tool Wiring (MTW) CSA C22.2 No. 75 Thermoplastic Insulated Wires and Cables ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy Federal Specification A-A-59544 NMX-J-010-ANCE Thermoplastic insulated wires and cables NOM-063-SCFI Electrical Products – Conductors – Safety Requirements Application & Features APPLICATION Southwire THHN copper conductors are primarily used in conduit for branch circuits in commercial or industrial applications as specified in the National Electrical Code® and other applicable codes and standards. Voltage for all applications is 600 volts. These conductors have multiple ratings depending upon the product application.  Allowable temperatures are as follows: THHN or T90 Nylon- Dry locations not to exceed 90°C THWN- Wet locations not to exceed 75°C or dry locations not to exceed 90°C or locations not to exceed 75°C when exposed to oil TWN75- Wet locations not to exceed 75°C MTW- Wet locations or when exposed to oil at temperatures not to exceed 60°C or dry locations not to exceed 90°C (with ampacity limited to that for 75°C conductor temperature per NFPA 79) AWM- Dry locations not to exceed 105°C only when rated and used as appliance wiring material FEATURES  Gasoline and Oil Resistant II VW-1 Sizes 14 through 10 AWG FT1 All Sizes AWM- Sizes 14 through 10 AWG MTW- Stranded Constructions Only RoHS Compliant