ESAB Rebel EMP 285ic Multiprocess Welder

ESAB Rebel EMP 285ic Multiprocess Welder     Boasting a 5 to 300 Amp range, this machine has the power to do it all! Not only can this machine run MIG, Stick, AND TIG processes, but it can do so with the best of them, including single process machines! If ESAB didn't have your attention before, you might want to take a look now.   Features:   True Multi-Process Excellent performance on MIG, Flux-Cored, TIG and Stick industrial applications    Power to Perform 285A @ 40% with 1-Phase Model  285A @ 50% with 3-Phase Model  You will have the confidence to run the full range of .045" (1.2 mm) wire - short arc and spray transfer with increase deposition rates and productivity on smaller diameter wires such as .030" (0.8 mm) and .035" (0.9 mm)   4 Roll Drive System  Weld to .052" (1.4 mm) solid wire and up to 1/16" cored wire Welds rods up to 5/32"  (4.0 mm) Weld TIG rods up to 3/16"   Unmatched Portability/Mobility  Weighing in at 70 lbs with multi-voltage, multi-phase capable and 4 handle roll cage Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site   TFT Multilingual Display Packed full of features, Rebel EMP 285ic has 4 programable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting Gives you the ability to fine tune your welds for the most optimal performance   sMIG Technology  Innovative "Smart-MIG" feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc Set diameter and plate thickness and you are ready to weld   Included:   Power Supply  Tweco Spray Master Velocity MIG Gun  Electrode Holder Atom Arc 7018 Electrodes Victor Argon Flowmeter Regulator 12.5' (3.8 m) Hose Return Clamp with Leads Drive Rolls & Contact Tips .035" (0.9 mm) Wire Operators Manual   Specifications:   MAXIMUM OUTPUT 300A / 34V (1ph) 350A / 34V (3ph) PRIMARY VOLTAGE 120 - 240 VAC (1ph) 460 - 575 VAC (3ph) MIG WELDING OUTPUT 285A / 28V @ 40% Duty Cycle (1ph) 220A / 25V @ 60% Duty Cycle (1ph) 160A / 22V @ 100% Duty Cycle (1ph) 285A / 28V @ 50% Duty Cycle (3ph) 265A / 27V @ 60% Duty Cycle (3ph) 200A / 24V @ 100% Duty Cycle (3ph) STICK WELDING OUTPUT 260A / 30V @ 40% Duty Cycle (1ph) 210A / 28V @ 60% Duty Cycle (1ph) 135A / 25V @ 100% Duty Cycle (1ph) 285A / 31V @ 50% Duty Cycle (3ph) 255A / 30V @ 60% Duty Cycle (3ph) 180A / 27V @ 100% Duty Cycle (3ph) TIG WELDING OUTPUT 285A / 21V @ 40% Duty Cycle (1ph) 240A / 19V @ 60% Duty Cycle (1ph) 185A / 17V @ 100% Duty Cycle (1ph) 285A / 21V @ 50% Duty Cycle (3ph) 265A / 21V @ 60% Duty Cycle (3ph) 220A / 19V @ 100% Duty Cycle (3ph) CURRENT RANGE 5 - 300A (1ph) 5 - 350A (3ph) MIG WELDING VOLTAGE RANGE 12 - 34 V WIRE FEED SPEED RANGE 60 - 800 ipm (1.5 - 20.3 m/min) NOMINAL OCV VOLT/DC 68 VDC MAXIMUM PLATE THICKNESS 1/2" (13 mm) WIRE DIAMETER RANGE Mild Steel: .023" - 0.52" (0.6 - 1.3 mm) Stainless Steel: .030" - .052" (0.8 - 1.3 mm) Aluminum: .030" - 1/16" (0.8 - 1.6 mm) Flux Cored: .030" - 1/16" (0.8 - 1.6 mm) WIRE SPOOL SIZE 4, 8 & 12 (100, 200 & 300 mm) APPROVALS CSA E60974-1-00 UL60974-1 IEC 60974-1 PROTECTION CLASS IP23S POWER SOURCE DIMENSIONS 26.5" x 11.5" x 19.5" (673 x 292 x 495 mm) POWER SOURCE WEIGHT 70 lbs (31.7 kg) SUPPLY VOLTAGE RANGE 90 - 270 VAC NUMBER OF PHASES  1-Phase 3-Phase SUPPLY PLUG 1-Phase: NEMA 6-50P (230 V) 3-Phase: No plug for 3ph unit LEAD CORD LENGTH 10' (3 m)   Accessories:   PRODUCT NUMBER PRODUCT NAME 0558102493 ESAB TXH 201 TIG Torch Outfit 1027-1398 Tweco 200 Amp Spool Gun - Tweco® Style 0558102491 ESAB Rebel EM/EMP 235ic Single Cylinder Cart 1023-1277 Tweco Spray Master® V250 Amp V-Series MIG Gun - Tweco® Style 1036-1756 Tweco Spray Master® V350 Amp V-Series MIG Gun - Tweco® Style 21155 ESAB .023" - .030" V-Groove Drive Roll 21156 ESAB .035" - .045" V-Groove Drive Roll 21157 ESAB .052" - 1/16" V-Groove Drive Roll 21160 ESAB .030" - .035" V-Knurled Drive Roll 21161 ESAB .040" - 1/16" V-Knurled Drive Roll 21159 ESAB 3/64" - 1/16" U-Groove Drive Roll 0558001758 ESAB Inlet Guide   Videos:   Q & A Rebel EMP 205ic AC/DC, Launch of Rebel EMP 285ic Rebel by ESAB: Go Anywhere, Weld Anything  Rebel Truth - "Ready To Weld" Rebel Truth -  "Rugged" Rebel Truth - "sMIG: Smart MIG"