CHC XL Extreme High Flow Hot End (Wear Resistant Air or Water Cooled)
Want a hot end that will keep up? This is an excellent option, with flow rates more than double a traditional high flow hot end. Offered in both Air and Water Cooled (great for higher temp applications!) this is one of the premier hot ends on the market! ▉Experiment and model links: https://drive.google.com/drive/folders/1OZ63PyMMLdxiBmocW5_eKUTc0mskB0GJ ▉Description: The CHC® XL is a high flow hot end designed specifically for high speed FDM printing. It has a lightweight design with ceramic heating elements to reduce dead weight at high speeds. It is compact and ruggedized to reduce your cost of operation. ▉Highlights: -Compact form factor and light weight. -High flow rate to meet the requirements of high-speed printing. -Air-cooled and water-cooled options, even if your heater chamber is up to 120 (water cooled) degrees it can still print normally. -Thanks to the patented multiple thermal break design, the cold end of the heat breaker can be kept at a lower temperature, which reduces the requirements for environment and heat dissipation, and also reduces the occurrence of thermal creep and improves the success rate of printing. -Embedded temperature sensor for more accurate temperature control. -Rugged, patented monolithic construction prevents damage to the thin-walled throat from nozzle changes or accidental collisions. -Optional ceramic wear-resistant coated transition zone increases the life of the print wear filament by up to five times. -Compatible with V6 style nozzles and can also be fitted with a melting zone extender to increase flow even further. -Easy to maintain， Replacement of heating elements and temperature sensors is a breeze. -Multiple temperature sensor options. -MCH ceramic heating elements with low temperature resistance coefficient will not lose too much power even after the temperature rises. ▉What's in the set? -CHC XL WR (Wear Resistant) Hotend either Air or Water Cooled (your selection) -Heatsink -WR Heating Block -PT1000 Thermistor -Ceramic heating element -Socks X2 -Water Cooling Tube (for Water Cooled Model) 、 ▉Experiment and model links: https://drive.google.com/drive/folders/1OZ63PyMMLdxiBmocW5_eKUTc0mskB0GJ ▉Print Test Hotend: CHC® XL hotend from Triangle-lab® Experimental Platform: Modified CR-10 with klipper firmware Figure 5 Mounting method: Evantis 5015(S) Toolhead Figure 6 Slicing software: PrusaSlicer 2.8.0 Model: Flow Rate Test Geometry BY E3- online as in Figure 1 Nozzle type: V6 style Brass Parameter setting: Vase mode Extrusion multiplier: Adjust to the appropriate value according to the width of extrusion There was no retraction during the whole process The criteria for determining unacceptable cases are illustrated in Figures 2 and Figures 3.▉Print Test CHC® XL hotend with V6 style brass nozzleCHC® XL hotend with Volcano style brass nozzle Plus MZE