JANTEX BINDER 45 NRF

???Jantex Discharge Base JT1 ??is used in a system to strip dyed ground shades and simultaneously replace them with a pigment color if desired.?? It is available in a standard base form. ??Prepare your print paste by adding the pigment concentrate to the discharge base at the desired shade or level and mix well.?? 1 to 10% is normal for standard pigments and up to 20% for Fluorescent pigments.?????? Add the activator at approximately 6%.?? Do not prepare more color than is anticipated for immediate use as the color will have a limited shelf life, approximately 8 hours. ??Print on fabric with a 60 to 150 mesh screen.?? While still wet, place in hot air oven for 3 to 5 minutes at 300 to 325 degrees F.?? Do not allow the print to dry before placing in oven.?? The more moisture available the better the result.?? ??The fabric to be printed must have been dyed with dischargeable dyes. ????You must check with your dyer or fabric supplier to assure that appropriate dyes have been used.?? Not