NewBeeDrone Prusa MK3S Print Bed mount Quad Bearing Upgrade Kit

Some people say three points are more stable then 4 points, but in my test results, it is way better then a 3 bearing mount solution. It makes the print bed more locked in and stable.  The kit comes with  1x 6mm Carbon fiber Quad Bearing mount4x Misumi LM8UU Linear Bearing 4x Bearing holder 10x M3 Steele screw for bearing holder  Installation  1. Remove your the heat bed screws and take out the heat bed, keep the original screw and stand-off, we are going to use it later. 2. Unscrew 6 locknut to release the original mount from the bearing, unscrew the belt holder.  3. Cut the rod holder zip ties to release the rod and remove the original bearing. After you remove the original bearing, please use microfiber cloth to clean up the rod.  4. install the Misumi LM8UU bearing on the carbon fiber mount, use the metal holder and the screw to secure the bearing. (At this step, please make sure the bearing are placing in the right position) 5. Install both rod into the bearing and mount it back t