30" Graphtec FC8600-75 High Performance Vinyl Cutting Plotter - Refurbished (1, 2, 3 or 4 Years Warranty)

Note: Choose between the 1, 2, 3 or 4 Years Warranty  Key Features Fastest cutting speed in its class Highest cutting force in its class Reliable long-length tracking PERF CUT enabled high performance cutters finish the job Auto mark detection Segment area compensation Multiple-Mark compensation Specifications CPU: 32-bit CPU Configuration:  Grit rolling type Drive method:  Digital servo drive Max. cross cut width:  886mm Number of push rollers:  2 rollers Max. cutting speed: 1485 mm/s at 45 deg. direction Axial acceleration:  Max. 39.2 m/s2 (4G) in 8 steps Cutting force:  Max. 5.88 N (600 gf) in 48 steps Mechanical resolution:  0.005mm Programmable resolution:  GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GL: 0.025mm Distance accuracy:  Max. 0.1mm or 0.1 % of plotted length Repeatability: Max. 0.1mm in plot up to 2m (excluding the expansion and contraction of the media) Minimum character size:  Approx. 3mm alphanumeric (varies depending on character font and media) Mountable number of tools * 1 tool (cutting blade, plotting pen or pouncing tool) in standard; * 2 tools (cutting blade and plotting pen) when second penholder (optional) is installed Blade Type:  Supersteel (0.9mm or 1.5mm diameter) Pen Type:  Water-based fiber-tip pen, Oil-based ballpoint pen Pouncing tool type:  Steel pin 1.2mm diameter, required optional pouncing tool (PPA 33-TP12) Media types * Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25mm thick * Sandblast resist rubber up to 1mm thick Compatible paper for pouncing:  Regular paper from 0.06 to 0.13mm thick Light pointer:  Built into the tool carriage Cross-cutter:  Built into the tool carriage Perforation cutting:  Supported (performed by force control) Registration mark sensing system:  Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect Standard interface:  USB2.0 (High speed), RS-232C and Ethernet (10BASE-T/100BASE-TX) Buffer memory:  2MB Command sets:  GP-GL / HP-GL emulation (Set by menu or command and selects from GP-GL, HP-GL, or Auto select) Condition settings:  Dual configuration (save two user settings with eight separate condition setting for each user) Display:  Graphic type LCD (3", backlight) Power source: 100 V to 240 V AC, 50 / 60 Hz Power consumption: Max. 160 VA Operating environment 10 to 35 Degree C, 35 to 75 % R.H. (non-condensing) Guaranteed accuracy environment 61 to 90 Degree F (16 to 32 Degree C), 35 to 70 % R.H. (non-condensing) Included software Windows driver, Plotter controller, Graphtec Studio and Cutting Master 3 Max. cutting area (W x L ) 30" x 164.04' (762mm x 50m) Cutting area of guaranteed accuracy 29.21" x 50' (741.93mm x 15.24m) Mountable media width Min. 1.97" (5cm)Max. 36.22" (92cm) Compatible OS Windows 10 / 8.1 / 8 / 7 / VistaMac OS 10.6 to 10.10 Compatible Standards UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)FCC-A, EN55022-A Dimensions (W x D x H ) External: Approx. 50 x 28 x 48" (1270 x 711 x 1219mm) Weight 115 lb (52kg)(Approx.) (Including stand