1000M Wireless 999 CH Transmitter & 24 Receivers With Vibration and Beep Function (Model 0020174)

Here is the operation video: https://www.youtube.com/watch?v=H_UlKSrbvLk&feature=youtu.beFeature:Wireless control.You can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 433MHzReceiver:Model No.: Z-063 Modes: Vibration, Beep, Vibration and BeepDecode: Learning codePower Supply: 2 x AAA 1.5V Battery (included)Size: 77mm x 38mm x 17mmTransmitter:Model: CM-999Channel: 999 CHButton: 12 buttonsRemote Control Distance: 1000m / 3000ft (theoretically)Encode: Learning codeUnit size: 117mm x 46mm x 15mmPower Supply: 3 x 1.5V batteries (included, can be used for 12 months)Frequency: 433MHzUsage of transmitter:Transmit a wireless signal: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal.Delete wrong digit: If you press wrong digit before pressing the "Send" button, you can press "Delete" button to delete all numbers you pressed previously.Usage of receiver:Vibration mode: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal, the corresponding receiver vibrates for 5 seconds.Beep mode: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal, the corresponding receiver beeps for 5 seconds.Vibration & Beep mode: Press digits button to select a number from 1 to 999 by combination of the digits 0~9, then press the "Send" button to transmit this wireless signal, the corresponding receiver vibrates and beeps together for 5 seconds.Each channel of transmitter can control one receiver.Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of receiver again, switch to vibration & beep mode; press the button of receiver again, switch to vibration mode.Note:If you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.Package Include:24 x Receiver: Z-06 (Vibration & Beep mode)1 x Transmitter: CM-9991 x User manual