1CH RF DC Electric Motor Controller Momentary Interlocking Mode (Model 0020202)
By using this motor remote control kit, you can remote control DC motor. Working modes include toggle, momentary and latching. Easy to wire and operate.The motor remote control kit is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and machines. Remote control distance is up to 1000MHere is a video about how to use this wireless switch to open or close a valve. https://www.youtube.com/watch?v=Njnr08DT0fY Here is a video about how to use this wireless switch to remotely control a DC motor. https://www.youtube.com/watch?v=mvWHDVpIi4gPackage Include: 1 x Receiver: S1FU-DC06 / S1FU-DC09 / S1FU-DC12 / S1FU-DC24 2 x Transmitter: C-3-21 x User manualFeature:Wireless control, easy to installControl motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with DC voltage.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 433MHzReceiver:Model No: S1FU-DC06 / S1FU-DC09 / S1FU-DC12 / S1FU-DC24Control Modes: Inversion (Self-locking, Momentary, Interlocking)Coding Type: Fixed codeCoding Setting: By learningPower Supply (Operating Voltage): DC6V (S1FU-DC06), DC9V±1V (S1FU-DC09), DC12V±1V (S1FU-DC12), DC24V±1V (S1FU-DC24)Output: DC6V (S1FU-DC06), DC9V (S1FU-DC09), DC12V (S1FU-DC12), DC24V (S1FU-DC24)PCB size: 67mm x 50mm x 18mmCase size: 75mm x 54mm x 27mmStatic Current: ≤6mAMaximum Working Current: 10ATransmitter:Model No.: C-3-2Channel: 3 CHRemote Control Distance: 100m / 300ft (theoretically)Encode: Fixed code by bonding pad encodedUnit size: 58mm x 39mm x 16mmPower Supply: 1 x 23A -12V battery (included, can be used for 12 months)Usage:Connect the motor to Terminal B of relay 1 and relay 2.Setting different control modes (We have set the receiver as Self-locking control mode before delivery. If you want to use other control modes, do as following operation):Setting control mode Self-locking: Only connect Jumper-2.Control mode Self-locking: Press -> Rotate; Press again -> Stop.Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC (1: ＋, 2: －), motor rotates in the positive direction.Press button ▲ again: Terminal B of relay 1 and relay 2 no output, motor stopsPress button ▼: Terminal B of relay 1 and relay 2 output － DC (1: －, 2: ＋), motor rotates in the reversal direction.Press button ▼ again: Terminal B of relay 1 and relay 2 no output, motor stopsSetting control mode Momentary: Only connect Jumper-1.Control mode Momentary: Press and hold -> Rotate; Release -> Stop.Press and hold button ▲: Terminal B of relay 1 and relay 2 output ＋ DC (1: ＋, 2: －), motor rotates in the positive direction.Release button ▲: Terminal B of relay 1 and relay 2 no output, motor stopsPress and hold button ▼: Terminal B of relay 1 and relay 2 output － DC (1: －, 2: ＋), motor rotates in the reversal direction.Release button ▼: Terminal B of relay 1 and relay 2 no output, motor stopsSetting control mode Interlocking: Do not connect Jumper-1 and Jumper-2.Control mode Interlocking: Press button ▲ and ▼ -> Rotate; Press button ■ -> Stop.Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC (1: ＋, 2: －), motor rotates in the positive direction.Press button ▼: Terminal B of relay 1 and relay 2 output － DC (1: －, 2: ＋), motor rotates in the reversal direction.Press button ■: Terminal B of relay 1 and relay 2 no output, motor stops