2 Channels 3A AC 220V Electrical Devices Wireless Remote Switch Receiver (Model 0020614)
www.wireless-remote-switches.com
Electronics / Components

2 Channels 3A AC 220V Electrical Devices Wireless Remote Switch Receiver (Model 0020614)

$20.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Wireless Remote Switches Online Store

View Store

Feature: Wireless control, easy to install. Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 433MHz Receiver: Model No: S2XC-AC220 Channel: 2 CH Control Modes: Self-locking, Momentary, Interlocking Coding Setting: By learning Power Supply (Operating Voltage): AC100~120V (S2M-AC110), AC200~240V (S2M-AC220) PCB size: 80mm x 35mm x 14mm Case size: 100mm x 40mm x 24mm Maximum Working Current: 3A / each channel Usage: Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp 1 to the terminal “5” and the neutral wire. Connect the lamp 2 to the terminal “4” and the neutral wire. Setting different control modes: (We have set the receiver as Self-locking control mode before delivery. If you want to use other control modes, do as following operation): 1) Setting control mode Self-locking: Connect Jumper-2. Press button A of the transmitter: Connected lamp 1 is on. press button A again: Connected lamp 1 is off. Press button B of the transmitter: The connected lamp 2 is on. press button B again: Connected lamp 2 is off. 2) Setting control mode Momentary: Disconnect Jumper. Press and hold button A on the transmitter: Connected lamp 1 is on. Release button A: Connected lamp 1 is off. Press and hold button B on the transmitter: Connected lamp 2 is on. Release button B: Connected lamp 2 is off. 3) Setting control mode Interlocking: Connect Jumper-1. Press button A on the transmitter: Connected lamp 1 is on; Connected lamp 2 is off. Press button B on the transmitter: Connected lamp 2 is on; Connected lamp 1 is off. Package Include: 1 x Receiver: S2XC-AC220 1 x User manual

Show More Show Less