2 Channels AC Lamp Wireless Remote Control Switch With Three Mode Control (Model 0020615)

This is the operation video of wireless remote control AC lamp , you can click the website: https://www.youtube.com/watch?v=p1Gyh2Fk7TQ&feature=youtu.be Feature: Wireless control, easy to install Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with voltage of AC 200~240V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. With characteristics of reverse power protection and over current protection Audible / visual indication Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 433MHz Receiver: Model No.: S2XC-AC Channel: 2 CH Control Modes: Self-locking, Momentary, Interlocking Coding Type: Fixed code or learning code Coding Setting: By learning Power Supply (Operating Voltage): AC200~240V (S2XC-AC220) PCB size: 80mm x 35mm x 14mm Case size: 100mm x 40mm x 24mm Maximum Working Current: 3A/each channel Transmitter: Model No.: C-2 Channel: 2 CH Remote Control Distance: 100m / 300ft (theoretically) Encode: Fixed code by Soldering Unit size: 58mm x 39mm x 16mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months) Usage: Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp 1 to the terminal “5” and the neutral wire. Connect the lamp 2 to the terminal “4” and the neutral wire. Setting different control modes (We have set the receiver as Self-locking mode before delivery. If you want to use other modes, do as following): Setting control mode Self-locking: Only connect Jumper-1. Press button 1: Turn on the relay, terminal OUT outputs AC power. Press button 1 again: Turn off the relay, terminal OUT no output. Setting control mode Momentary: Do not connect Jumper-1 and Jumper-2. Press and hold button 1: Turn on the relay, terminal OUT outputs AC power. Release button 1: Turn off the relay, terminal OUT no output. Setting control mode Interlocking: Only connect Jumper-2. Press button 1: Turn on the relay, terminal OUT outputs AC power. Press button 2: Turn off the relay, terminal OUT no output. Package Include: 1 x Receiver: S2XC-AC220 (2 Channel / Three Control Modes) 2 x Transmitter: C-2 1 x User manual