AC Motor Reversing Switch 5KM Long Range Remote Control (Model 0020129)

Introduction:This is a long range RC transmitter and receiver kit, including a S1PFCW-AC-ANT3 receiver and a CC-3-2 transmitter. It is developed by LORA (Long Range) wireless communication technology, so it has ultra-long working distance, ultra-high receiving sensitivity, superior anti-interference ability, and smaller power consumption. It’s ideal for controlling various appliances and equipment with AC motors, such us rolling blinds, rolling doors, projection screens, awnings, pumps, winches and conveyors.Key Features:Super Long Working Range: Up to 5000m (15,000 ft) in open areas.Waterproof Design: Receiver has waterproof case and waterproof connector for outdoor use.Suitable for AC motors.Universal Voltage Compatibility: Supports 110-240V AC (110V/120V/220V/240V), but does not work on US 220V motors.High Power: Each channel can work at maximum load current 30A.2 Selectable Working Modes: Momentary, Interlocking.With limit control terminals: Connect sensors, limit switches or external devices to stop the motor.With Feedback Function: Two-way communication lets the transmitter confirm receiver activation with a buzz.Reliable Signal: RF signal can pass through walls, floors, doors, or windows, but it will lose some operating range.Safety Features: Reverse voltage and overcurrent protection.Interference: Two or more receivers may be used in the same area without interference.Receiver S1PFCW-AC-ANT3 Parameters: Parameters Detail Operating Voltage 110~240V AC (110V/120V/220V/240V), but does not work on US 220V motors. Output Type 110~240V AC (110V/120V/220V/240V) Channel 1 CH, can work with 1 AC motor Maximum Working Current 30A / each channel, so motor's maximum starting current cannot exceed 30A. 2 Selectable Working Modes Momentary, Interlocking Suitable Wires for Connecting Terminals 22-12 AWG Operating Temperature -20 °C ~ +70 °C PCB size 140 x 73 x 18 mm (5.5 x 2.9x 0.7 inches) Case size 192 x 100 x 45 mm (7.5 x 3.9 x 1.8 inches) Matching Transmitters CC-3-2 Transmitter CC-3-2 (3 Buttons) Parameters: Parameters Detail Operating Voltage 9V (1 x 6F22-9V battery, can be used for 12 months) Operating Frequency 433.92 Mhz Transmitting Distance 5000m / 15000ft (theoretically) Unit Size 135 x 42 x 25 mm (5.3 x 1.7 x 1.0 inches) Setting different working modes:The receiver will be set in Interlocking mode before leaving the factory, if you require momentary mode, please follow the following steps.1) Setting Interlocking mode: Turn on the second bit of the dip switch.Operation with CC-3-2:Press Button ▲ → Motor rotates in positive directionPress Button ▼ → Motor rotates in reversal directionPress Button ■ → Motor stops2) Setting Momentary mode: Turn off the second bit and the third bit of the dip switch.Operation with CC-3-2:Hold Button ▲ → Motor rotates in positive directionRelease Button ▲ → Motor stopsHold Button ▼ → Motor rotates in reversal directionRelease Button ▼ → Motor stops