Enhance your car's readiness with the Portable Car Jump Starter Power Bank, boasting 20000mAh capacity, LED light, air compressor, and 12V battery charger functionality

SPECIFICATIONS Battery Capacity(mAh): 18000-20000 Peak Current: 1000 A Conversion Rate: >90% Number Of Built-in Batteries: 4 External Testing Certification: MSDS External Testing Certification: FCC External Testing Certification: ce Input: 5V/2A Output1: 12V Jump start Output2: 5V/2A Product Life: >1000 times Product Size: 167*86*35mm Packaging Size: 21.2*12.1*7.2cm Packing: Color Box Suitable Temperature: -20℃-60℃ Input Interface: Type-c Tips before useOnly cars with a displacement below 3.5L can be startedThe product has just been received. You need to first turn on the flashlight to discharge it, and then charge the product for more than 4 hours before starting the car, as there is virtual electricity inside the product This operation can extend the service life of the product!1. It is recommended to start the vehicle with three grid power supply or at least 60% power supply2 Unable to continuously ignite and start the car/or hold the key, starting every time after a 30 second interval before proceeding to the next start3 The positive and negative poles cannot be reversed. Two clips cannot be connected for short circuit.4 Remove the clip within 30 seconds after successfully starting the car. Starting the car: Support starting gasoline cars with a displacement of less than 3.5L Charging electronic products: Supports Apple, Samsung, Huawei, Oppo, Vivo and other branded phones and tablets Emergency Lamp: Lighting mode,SOS mode,explosion-flashing mode Material: ABS Size: Approx.13.9x7.8x2.4cm/5.47x3.07x0.94inches Capacity: 20000mAh Type-c Input: 5V/1A USB Output: 5V/2A EC5 Output: 12V Emergency Lamp: Support Work Temperature: between minus 20 degrees and 60 degrees Applicable Models: 12V gasoline vehicle Usage Starting the car:1. Insert the clip into the power start clip, and it is recommended to display at least two levels of power.2. The red clip (+) is connected to the positive pole, and the black clip (-) is connected to the negative pole.3. Return to the car and insert the car key, ignition and start the car.4. Start and remove the electrical clip. (It is recommended to remove it within 20-30 seconds) This is a multifunctional product that can be used as a jump starter or as a power bank, it can be used in the following scenarios: