Professional Vacuum Enema Twisting Production Line High Productivity

                 Professional Vacuum Enema Twisting Production Line High Productivity  1.Product introduction of Vacuum Enema Twisting Production Line:                                                1. Main function: It is suitable for filling small-diameter kink products such as protein casings (kissing sausage, table roast) nylon casings. 2. Main features 1) The machine is made of high-quality stainless steel, easy to clean, and in line with national hygiene standards. 2) The main pneumatic control units are all imported components, which improves the operation accuracy and service life of the equipment, and is safe and reliable. 3) The various actions and parameters of the machine are all modified on the control box in front of the machine, which is simple and clear, and the operation is very convenient. 4) The running speed can be adjusted steplessly according to the needs of users. 5) The quantitative size of the length is set by the user changing the timing belt. 6) Casing automatic detection system (automatic stop without casing). 7) Kinker automatic flip system. 8) On-line with the filling machine to realize continuous automatic production. 9) High efficiency and low cost. 3. The main technical parameters 1) The various actions and parameters of the machine are all modified in the filling machine, which is simple and clear, and the operation is very convenient. 2) The running speed can be adjusted steplessly according to the needs of users. 3) On-line with the filling machine to realize continuous automatic production. 4) High efficiency and low cost.  High Speed Kinking Machine WM-GSNJ-II Size 600*1250*1400mm Weight 450kg Voltage 380V-400V 50HZ Power 4KW Speed Stepless speed regulation 0-200rpm Capacity 300-500pcs/min Air Compressor Need 0.5---0.8MPa  Transfer Method servo drive Suitable For Specifications Length40-200mm diameter 16-30mm Control Man-machine interface matching filling machine  Induction Method Pneumatic sensor switch, proximity switch Electrical Components Inovance//Hitec//Kunlun Tongtai Waterproof Level Main IP65       WM-XG2250 Sausage Hanging Machine  1) The various actions and parameters of the machine are all modified in the filling machine, which is simple and clear, and the operation is very convenient. 2) The running speed can be adjusted steplessly according to the needs of users. 3) On-line with the filling machine to realize continuous automatic production. 4) High efficiency and low cost.    Power 1.5KW Voltage AC380V-400V 50HZ Capacity 3600kg/h Running Speed Stepless speed regulation 0-1000 Twisting Speed Stepless speed regulation 0-450 times/min Weight 160L Size 3000*635*1144mm   WM-ZKGC3600 Vacuum quantitative filling machine   Voltage 380v   50HZ power 8KW Capacity 3600kg/h Filling Speed Stepless speed regulation 0-450 times/min Twisting Speed Stepless speed regulation 0-450 times/min Hopper Capacity 220L Vacuum Pump German Puxu 2.0 series Vacuum Degree 2×102mbar Agitator Device Directional spiral auger Single Irrigation Pipe Φ22mm   Φ28mm  Φ35mm Twister (optional) Standard configuration of kink tube: Φ10, Φ12, Φ15, Φ19mm (standard configuration) (Material: 316L)     Φ8 , Φ9mm (special customization) Rubber gasket:  Φ13, Φ16, Φ19mm (standard configuration) Stop ring:    Φ10, Φ12, Φ15, Φ19mm (standard configuration) Adjustment sleeve:    Φ14, Φ20, Φ26 (standard configuration) Hand-held sleeve:    Φ10, Φ12, Φ15, Φ19mm (standard configuration) Follow-up sleeve:    Φ10, Φ12, Φ15, Φ19mm (standard configuration) Synchronous belt: T10-530-17 Magodix (standard configuration) rear box T10-500-10 Magodix (standard configuration) front box T10-530-25 Magodix (standard configuration) kink motor Lifting Device (optional) Hydraulic Electrical Configuration KP700---Siemens human-machine interface (global European version) SINAMICS-V90-3.5KW Siemens servo drive (filling) SINAMICS-V90-1.5KW Siemens servo drive (kink) PLC-CPU1214C  Siemens PLC PSU100L      Siemens switching power supply KM AC contactor  Siemens series Emergency stop switch---German Mueller Reducer Imported--SITI-2 (standard) Machine Weight Approximately 780 kg (without lift) Approximately 1260 kg (fully equipped) Size 1130X1150X1850(mm) without lifting 1960X1450X1850(mm) fully equipped Contact Us to Get a Quote Zhengzhou Wenming Machinery Co.,Ltd Address: Waibao Industrial Park No. 139 Yangjin Road Jinshui District Zhengzhou City, Zhengzhou, Henan, China. Office:0086-13-303-831586  Whatsapp/Wechat: +8618838002509 Email: wm21@wmmachinery.com You can contact us to get more details of machines or let us know your requriement we can design and manufature machine according to your need. Click to leave your information and requirements 2.Pictures  of Vacuum Enema Twisting Production Line: