Prestige 18LCDSP 2Way Replacement Remote Key FOB APS997Z PE2LCDZ
Brand New Remote MODEL# : 18LCDSP UP FOR SALE IS Prestige 18LCDSP Remote Only. NOTHING ELSE. Prestige Remote Model 18LCDSP 2-Way 5 Button LCD Remote FCC ID: TBQT30-SS2W Audiovox / Prestige / Pursuit TYPE 24 Remote Uses CR2450 Battery (Included) Instructions Can Be Viewed Below COMPATIBLE With These Systems: PE2LCDSP PE2LCDZ APS596Z APS997Z D O N O T B U Y If you do not have one of these systems, or if your existing remote and FCC ID is not exactly 18LCDSP / TBQT30-SS2W It WILL NOT WORK for you. It doesn't matter if it looks like another remote you have. Many remotes have the same design but operate on different codes. D O N O T B U Y If you have not located the Valet / Override Button in your vehicle, connected to the brain of your Prestige system, and necessary for programming your new remote. It is N O T a button on your remote. Otherwise, It WILL NOT WORK for you. Programming instructions To Auto Program a remote control: Cycle the vehicle's ignition to ON. Press and release the valet/override button three (3) times. The system will beep one (1) time to indicate it has entered remote control programming. Press the #1 button of each remote control you wish to program. The system will beep and flash the parking lights one (1) time to indicate the remote control is programmed successfully. NOTE: The #1 button is the LOCK button on all keyiess entry remote controls or the START button on all one (1) button remote controls. Cycle the vehicle's ignition to OFF to exit programming mode, or cycle the ignition key OFF/ON to advance to the next Feature Bank. Notes: • The system will store in the memory a maximum of four (4) remote controls. Additional programmed remote controls will delete the oldest-programmed remote control. .. The system will accept a maximum of two (2) 2-Way remote controls. During normal operation, the Programmed Transmitter Notification (PTN) function indicates how many remote controls are programmed by flashing the LED a certain number of times when the vehicle ignition is turned on. Deleting All Remotes: 1. Perform steps one (1) and two (2) above. Press and hold the Valet/Override button for five (5) seconds. 3. The system will sound one (1) long beep. This indicates all remotes have been deleted from memory.