Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver
Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience. The drone could do all the acrobatic motions smoothly, like diving and power looping. Check out our other pre-built quads, as well as other great products from Flywoo! Specifications Weight: 44.44g (without battery) FC & ESC : GOKU Versatile F405 2S 12A AIO Frame: Firefly 2S Nnano Baby 20 VISTA Frame kit Motors: Flywoo ROBO 1002 15500KV Props: Gemfan 2015-2 blade Link & Camera : Naked RunCam Link Wasp Nano GOKU Versatile F4 5-IN-1 1S AIO FC / VTX SIZE: 30x30mm Weight: 4.1g Hole: 25.5x25.5-3mm MCU: STM32F405 UARTS: 6 MOTOR: M1-M4 OUTPUT I2C: SCL/SDA GYRO: ICM42688 Barometer: ICM42688 LED: 2x WS2812 Flash: 8M BEC: 5V 2A Firmware: FLYWOOF405S_AIO Onboard 4in1 ESC Built-in 1S/2S 12A BL_S 4in1 ESC Support Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input Voltage: 1-2S Lipo Firmware: BLHELI_S Firmware: Z_H_30_REV16.7 Flywoo ROBO 1002 15500Kv Motor KV: 15500Kv Input Voltage: 2S LiPo Stator Dimensions: Φ10mm x 2mm Shaft Diameter: Φ 1.5mm Wire Dimensions: 30AWG x 40mm Weight (with wires): 2.4g Nano Wasp HD Camera Dimensions: L18mmxW14mmxH18mm LENS: FOV D:160° H:127° V:92° Resolution: 720P@120fps(4:3) Net Weight: 6g(With Cable) Shutter: Rolling Shutter Coaxial Cable: 80 mm Image Sensor: 1/3" Naked Link Air Unit Input Voltage: 7.4-26.4V@ 4-9W Operating Frequency: 5.725-5.850 GHz Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km; I/O Interface: Type-C, IPEX, 3-in-1 port, Supported Flight Control System: BetaFlight Operating Temperature Range: 0° to 40° C (32° to 104° F) Includes 1x Flywoo BNF Firefly 2S Nano Baby 20 HD 2" Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver 2x set of 2015-2 props 1x Screw spare packs 2x Battery holder 4x Prop guards