Holybro Kakute H7 V1.3 Tekko32 F4 50A 4-6S 30x30 Stack/Combo (H7 FC / 50A F4 32bit 4in1 ESC)
The Holybro Kakute H7 has integrated Bluetooth, dual 4in1 ESC ports, HD camera plug, barometer, OSD, 6 UARTs, MicroSD card, 5V & 9V BEC, easy soldering layout, etc. Supporting DJI HD, its 9V regulator powers FPV Air Unit & Caddx Vista. With 6 UART ports & inversion, it offers unlimited Blackbox data logging. BetaFlight OSD displays info on FPV display, and barometer helps autonomous flight. LED & buzzer pad, I2C pad for external GPS/Magnetometer. Check out all our 30x30 Stacks and the rest of our HolyBro selection! Features This V1.3 now has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port. Specifications for HolyBro Kakute H7 V1.3 FC MCU - STM32H743 32-bit processor running at 480 MHz IMU - MPU6000 Barometer - BMP280 OSD - AT7456E Onboard Bluetooth chip - ESP32-C3 SpeedyBee IOS & Android App Compatible Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm). 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry) 9x PWM Outputs (8 Motor Output, 1 LED) 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible) 1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit) Battery input voltage: 7V to 42V BEC 5V 2A Cont. BEC 9V 3A Cont USB Type-C Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets Dimension - 35x35mm Weight - 8g Specifications for Tekko32 F4 4in1 50A ESC Continuous Current: 50A x4 Burst Current: 60A x4 Supports 4-6S battery Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc. ESC telemetry Supported Onboard analog current sensor No output BEC BLHeli_32 firmware 1000uf 35v capacitor included (highly recommended for 6s setup) Amperage meter scale ratio: 120 (V1.9 Version) Dimensions: 48x37x6mm / Weight: 13.8g Mounting holes: M4 30.5x30.5mm (M3 grommets included) Firmware Targets BetaFlight: KakuteH7 (v4.2.11 and above) INAV: KakuteH7 (4.0.0 & above) SD card support added in 4.1.0. ArduPilot: KakuteH7 (4.2.0 & above) Includes Holybro Kakute H7 V1.3 Tekko32 F4 50A 4-6S 30x30 Stack/Combo (H7 FC / 50A F4 32bit 4in1 ESC) 1x Wiring Kit Wiring Diagram