Managed G.fast/VDSL2/V35b CPE/Slave Modem - NV-450S
DISCLAIMER The NV-450S is primarily used alongside the Netsys NV-450M CO/Master as part of the Netsys Managed G.fast Gigabit Ethernet Extender Kit (NV-450EKIT). Using this product to replace the modem provided by your ISP requires their cooperation, and advanced knowledge of their equipment and configuration settings. Description The Netsys NV-450S G.fast/VDSL2/V35b CPE/Slave Modem is an extremely flexible CPE/Slave modem which is compatible with several G.Fast/VDSL2/v35B DPU/DSLAM’s, as well as the NV-450M Managed G.fast CO/Master. (The Netsys NV-450EKIT includes both units for point-to-point Ethernet Extension applications.) A cost effective solution that delivers high-speed internet access to end-users over existing copper wire infrastructure, the NV-450S supports future-proof super Vectoring (G.fast) compatibility, as well as VDSL2, and VDSL35b, meeting a variety of distance requirements for ISP’s to cover end users. Please be sure to consult the below compatibility table to ensure the NV-450S is compatible with your DPU/DSLAM before purchasing. For point-to-point Ethernet Extension applications, please see our NEW Netsys NV-450EKIT Managed G.Fast Gigabit Ethernet Extender (includes NV-450M CO/Master and NV-450S CPE/Slave). DSLAM Compatibility Features Compliant with ITU-T G.9700/9701 G.fast Standards Supports super Vectoring (G.fast), Vectoring (VDSL2), super Vectoring (VDSL35b) Supports 212a symmetric/asymmetric and 106a symmetric/asymmetric band profile Supports 17a/35b band profile Supports dual wave profile 106a/b & 212a/b G.fast profile supports up to 1.2Gbps aggregate bandwidth Supports Router / bridge mode selection Supports IP Multicast, IGMP Proxy, Snooping, Static Routing IPv4, IPv6 forwarding, DHCP Server/Relay/Client IPv4/IPv6, DNS Proxy and Relay, NTP Client Supports Jumbo frame (MTU) up to 1600 bytes Supports MAC Address based filtering Supports NTP Time Server Supports remote management and monitor Supports HTTP/HTTPS web management Supports SSH/SSL Security Master/Slave Mode selection by firmware upgrading Supports Dual Firmware Image Backup 4 x RJ-45 10/100/1000Mbps Gigabit Ethernet Ports Supports IEEE 802.3 10Base-T, 802.3u 100Base-TX and 802.3ab 1000Base-TX Ethernet Standards RJ-11/Terminal block combo for line port Surge protection for Line port Splitter on board (1 x RJ-11 for POTS/ISDN) 2 x USB 3.0 Ports (Future Use) Reset Button (Factory Reset) Main Chipset : Intel CE, FCC, RoHS Compliant Technical Specifications Product Kit Contents 1 X NV-450S Managed G.fast/VDSL2/V35b CPE/Slave Modem 1 X AC to DC Power Supply 1 X RJ-11 Patch Cable 1 X RJ-45 Patch Cable 1 X RJ-45 Coupler 1 X User Guide Download Link (via email) Cable Connections 4 X RJ-45 10/100/1000Mbps auto-negotiation Gigabit Ethernet port 1 X RJ-11 / Terminal block combo for VDSL2 line port 1 X RJ-11 connector for POTS/ISDN device 2 X USB 3.0 for connecting USB Dongle (Future Use) 1 X Reset Button for resetting to factory default LED Indicators 1 X Power LED 4 X Link/Active Status for Ethernet port 1 X G.fast Link LED 1 X xDSL Link LED 1 X Master LED Switch method: Store and forward Flow control: Full duplex: IEEE 802.3x Half duplex: Back pressure Typical Power Consumption 8.16W (full load without USB device), 18.16W (full load with 2 x USB devices) Power Supply: External switching power adapter (Input: AC 85~240 Volts/50~60Hz, Output: DC 12V/2A) Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F) Fanless, free air cooling) Storage Temperature: -20°C ~70°C (-4°F ~ 158°F) Humidity: 10 to 90% (non-condensing) Dimensions: 196 x 146 x 40 mm (7.7" x 5.74 " x 1.57") Shipping Weight: 2 lbs (0.9 kg) Agency Compliance FCC 47 CFR Part 15 Subpart B Class A, CE, ROHS Warranty 2 years (parts only)