Smartgen ATS Module Generator Controller HAT530N Original Genset Controller HAT530N ATS Controller

Controller HAT530N Function Item Parameter Function Item Parameter Display LED Alternator Frequency 50/60Hz AC System 1P2W/2P3W/3P4W Monitor Interface LINK Alternator Voltage (170~277)V(ph-N) Programmable Interface LINK Switch Over Priority ● Applicable Switch Type NO Breaking ATS and ONE Breaking ATS Case Dimensions(mm) 139*120*50 Panel Cutout(mm) 130*111 Operating Temp. (-25~+70)℃ Performance and characteristics 1. Measure and display 2-way 3 phase Voltage and Frequency2. Over/under voltage, loss of phase, phase sequence wrong, over/under frequency protection function. As default, phase reverse sequence protection and over/under frequency protection are disable; however, users can set the protection function as need.3. Parameters can be set via PC software using SG72 module (USB to LINK) or other converse module.4. The voltage normal delay of 1# or 2# can be set in (0~60) seconds and the Genset start delay can be set in (0~3600) seconds.5. The voltage abnormal delay of 1# or 2# can be set in (0~60) seconds and the Genset stop delay can be set in (0~3600) seconds.6. “1# power priority”, “Auto/Manual”, “No priority” and “2# power priority” can be set via controller front panel.7. Closing output signal can be set as on intervals or as continuous output.8. Applicable for 2 isolated neutral line.9. Auto/Manual mode. In manual mode, ATS transfer can be implemented via panel pushbutton.10. LEDs mounted on front panel can clearly show ATS running status.11. Forced Open input port been designed; When the input port is active, the switch will be Breaking position forcedly (woks forthe ATS with Breaking Position).12. AUX.OUTPUT 1 and AUX.OUTPUT 2 can be configured to make it easy to transfer power supply.13. The output contact capacity of 1# and 2# power supply transfer relay (1#CLOSE, 2#CLOSE) is 5A AC250V, passive contact, canbedirectly used in driving switch to transfer.14. The output contact capacity of Genset start relay (GENS START) is 7A AC250V/7A DC28V, passive N/C contact.15. Suitable for various AC systems (3 phase 4-wires, 2-phase 3-wires and single-phase 2-wire).16. Modular design, retardant ABS plastic shell, pluggable terminal, built-in mounting，compact structure with easy installation.