DSE5220 Generator Controller, DSE5220 Automatic Engine Control Module

The DSE5220 is an Automatic Mains Failure Control Module designed to automatically start and stop dieseland gas generating sets that include non electronic engines.  The module also provides excellent engine monitoring and protection features.The module has the ability to monitor under speed, over speed, charge failure, emergency stop,low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts,over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss ofthe speed sensing signal. The module displays fault conditions on the LCD display and via the LEDindicators on the front. The DSE5220 also has the ability to monitor a mains (utility) supply.  Upon detection of a mains (utility)failure the module automatically starts the generating set. Once the mains (utility) power has beenrestored it instructs the generating set to stop. ELECTRO-MAGNETIC COMPATIBILITY BS EN 61000-6-2EMC Generic Immunity Standard forthe Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-1Ab/Ae Cold Test -30 °CBS EN 60068-2-2Bb/Be Dry Heat +70 °C VIBRATION BS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm,8 Hz to 500 Hz @ 2 gn HUMIDITY BS EN 60068-2-30Db Damp Heat Cyclic 20/55 °C@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 °C@ 93% RH 48 Hours SHOCK BS EN 60068-2-7Three shocks in each of three major axes15 gn in 11 mS DEGREES OF PROTECTIONPROVIDED BY ENCLOSURES BS EN 60529IP65 - Front of module when installed into the control panel with the supplied sealing gasket