UL/CSA-Certifed AI 0.9 Cu Ft Digital Vacuum Oven

UL/CSA Certified AccuTemp-09 series digital desktop vacuum ovens feature a 0.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber. This certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also, come standard are the secondary over-temp protection dial, all stainless steel tubing/compression fittings, stainless steel vacuum/vent valve, oil-filled vacuum gauge, 5 sided pad heating technology and two-year warranty. The thermal-conductive aluminum pan shelves provide excellent temperature uniformity inside the chamber, while our 3rd gen LCD low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C. Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.  Also come standard is the adjustable gas backfill capability with a needle valve and a vent port, while the low proportional gain temperature controller keeps your oven temperature within +/- 1°F accuracy. Attention: Before initial use, run the oven at 400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process. LED lights color options Features 3-side heating system (left, right and bottom) and aluminum shelves provide excellent temperature uniformity. 12x12x11" Adjustable gas back fill capability with needle valve and vent port. Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time. Dual layer observation window with 1/2" tempered safety glass. 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature. Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance. Built-in inch mercury vacuum gauge and circuit breaker. Built-in check valve prevents vacuum oil backflow.  Built-in alarm alerts you when the oven has been shut down by safety circuitry due to out of range temperature. All ovens shipped from our New Jersey or Nevada location for quick delivery, come with one year warranty and lifetime US-based parts and service support Guaranteed US based phone and email assistance within 30 minutes from our engineers Manufactured in accordance with ISO 9001:2000 ISO 12100-1:2003, ISO 12100-2:2003 EN1050:1996, EN294:1992, EN60204-1:2006 CE Vacuum oven specifications  Electrical requirements  110V +/-10% 50/60Hz 1-PH 11A (or 220V +/-10% 50/60Hz 1-PH 5.5A)  Heaters  1200 watts  Chamber material  Stainless steel  Temperature controller  3rd gen low proportional gain, microcomputer PID controlled with LCD display  Temperature range  Ambient to 480°F  Temperature units  Fahrenheit or Celsius  Temperature accuracy  +/- 1°F  Temperature uniformity  +/- 7% of setpoint  Warm-up time to 100°F  60 minutes  Dwelling timer range  1-9999 minutes  Chamber dimensions  12 x 12 x 11" (WxDxH)  Unit dimensions  23.4 x 17.25 x 19" (WxDxH). With handle and vacuum port: 23.4 x 20 x 19" (WxDxH)  Shipping dimensions  28 x 24 x 24" (WxDxH)  Vacuum level  Better than 500 microns/millitorrs  Maximum vacuum  29.9" Hg (may vary based on your altitude, click here to learn more)  Vacuum gauge  0 to 30" Hg  Vacuum connector  KF25 flange  Unit weight  90 Lbs  Shipping weight  150 Lbs  Shelves included  4 aluminum slide-in shelves  Distance between shelves   2"  Door gasket material  Silicone  Observation window  1/2" tempered safety glass  Safety  Built-in circuit breaker, overheat protector