10pcs PTC Heater 220V 70°C-280°C 24x15mm Yoghurt Machine use
10pcs PTC Heater 220V 70°C 24x15mm Yoghurt Machine use 10pcs/Lot Specification Size:24x15x3mm Rated Voltage:220V Rated Power:see below table Cable/Length:Teflon/150mm Notice:Surface temperature is the dry heating temperature when heating in dry air(still air) Pls refer to below for other part number, contact us for order if client required other part number in below: 12*8*3mm 50*20*5mm 12V/120℃/1.5-4W 5V/70℃/1.2-2W 220V/270℃/8-30W 24V/230℃/8-20W 220V/150℃/5-15W 24V/140℃/3-12W 220V/70℃/3-10W 24V/60℃/2-8W 24V/140℃/10-35W 5V/180℃/4-9W 24V/60℃/5-20W 5V/50℃/0.3-1W 12V/230℃/15-30W 12V/230℃/3-12W 12V/140℃/5-15W 12V/140℃/1.5-4W 12V/60℃/3-8W 12V/60℃/1-2.5W 24V/230℃/15-40W 25*20*5mm 70*30*6mm 5V/50℃/1-2W 12V/60℃/5-20W 220V/70℃/2-5W 12V/140℃/10-20W 220V/100℃/3-8W 12V/230℃/10-40W 220V/120℃/5-10W 24V/60℃/10-30W 12V/60℃/2-8W 24V/140℃/12-40W 12V/140℃/4-12W 24V/230℃/20-60W 12V/230℃/8-28W 24V/160℃/15-50W 220V/150℃/5-12W 220V/70℃/8-25W 220V/180℃/6-15W 220V/120℃/9-35W 220V/200℃/8-18W 220V/270℃/120W 220V/230℃/8-20W 24V/60℃/4-20W 5V/100℃/4-8W 24V/140℃/10-40W 24V/230℃/15-60W 220V/250℃/9-25W 220V/270℃/9-30W 12V/80℃/2-8W 24V/80℃/4-20W 30*24*3mm 100*30*6mm 24V/230℃/50W 220V/70℃/25W 24V/140℃/40W 220V/65℃/20W 24V/60℃/20W 220V/270℃/200W 12V250℃/100W 12V/60℃/20W 5V/200℃/5W 12V/230℃/80W 5V/50℃/3W 220V/120℃/60W 12V/230℃/40W 24V/60℃/50W 12V/140℃/30W 24V/230℃/120W 12V/60℃/10W 30*30*6 24*15*3mm 220V/270℃/9-40W 220V/70℃/8W 220V/150℃/9-30W 220V/150℃/20W 220V/80℃/8-20W 220V/280℃/40W 24V/230℃/20-60W 220V/120℃/15W 24V/140℃/10-50W (Note:Specially designed for milk device) 24V/60℃/10-40W 12V/230℃/15-30W 70*8*3mm 12V/140℃/8-20W 220V/80℃/5W 12V/60℃/3-20W 220V/270℃/30W (Note:Specially designed for hot glue gun use) Attention For USe: 1.In consideration of thermal expansion, there should be some gap around the PTC heaters2. For heaters of surface-electrified type, it should be aware that safety distance is necessary to keep away from body, metals and frost. Comparatively, the surface-insulation type is more reliable in safety.3. When heaters connected to three-phase supply, the middle point should be connected with null line so that terminal voltage would not exceed due to imbalance of voltage.