BNC Connector Clips
Design: #Locking BNC connectors are good for quickly connecting and disconnecting cables. This can also lead to situations where accidental disconnection is possible, either due to heavy vibration, or simply from a technician disconnecting the wrong cable at the wrong time. This simple c-style clip snaps onto regular BNC connectors and locks the bayonet pins into place. Preventing the BNC cable from disconnection without first removing the band. For extra security a common zip style wire tie can be added to provide extra security. Use colored zip-ties to color code cables! The tabs have a knurled surface to provide a good grip during installation. The nylon Color is heat resistant, strong, and long lasting. The clips are fully reusable. #NonLocking These are free-spinning bands that snap onto the BNC connector. Meant for identification. You can paint them using any plastic compatible spray paint for a custom color marking. Use colored zip-ties to color code cables! Quantity: Sold in pairs Attaching the clips: #locking Each clip has a small arrow on the top. Orient the arrow towards the end of the connector without a cable protruding from it. (Or towards your equipment) If the connectors are already mated: Snap the clip onto the connector and then rotate in a clockwise direction until the clip fully snaps into place. If the connectors are not yet mated: You can pre-attach the clip to the end of the cable, but be sure it is loosely attached and not in the locked position. Then after attaching the cable, rotate the clip clockwise until locked. For extra security: Add a small zip style wire tie to the outside of the clip. Use colored zip-ties to color code cables! Removing the clip: #Locking To remove the clip, cut away any wire tie you may have in place. Then use a small flat head screw driver or your fingernail to lift one side of the clip and pry it away. The clips are reusable. What am I getting / not getting?: This list will update depending on the options selected Included: #Locking ● One pair of 3D printed BNC locking clips #NonLocking ● One pair of 3D printed BNC non-locking clips #All Not included: ● BNC Cables ● Zip Ties