Rich Solar 30 Amp PWM Solar Charge Controller

Rich Solar 30 Amp PWM Solar Charge Controller The Rich Solar 30 Amp PWM Solar Charge Controller RS-PWM30K is designed to regulate and protect your solar system, ensuring efficient and reliable energy transfer to your battery. It is designed for 24V, 30A off-grid solar systems with advanced pulse width modulation (PWM) technology, helping to maximize your solar system performance while protecting your battery from overcharging. Rich Solar RS-PWM30K 30 Amp PWM Solar Charge Controller Installation Read the Manual: Always start by thoroughly reading the manufacturer's manual that comes with the charge controller. This will provide you with specific details about your model, including input/output specifications and any unique installation requirements. Select a Suitable Location: Choose a location for mounting the charge controller that is dry, well-ventilated, and easily accessible for monitoring and maintenance. Mount the Charge Controller: Use the mounting hardware to securely attach the charge controller to a wall or another suitable surface. Ensure that it is mounted securely and level. Connect Solar Panels: Connect the solar panels to the solar input terminals on the charge controller. Observe proper polarity to avoid damaging the equipment. Usually, there are positive (+) and negative (-) terminals for each connection. Connect the Battery: Connect the battery or battery bank to the battery terminals on the charge controller. Again, observe the correct polarity. This is where the energy stored from the solar panels will be directed. Connect DC Load (if applicable): If you have a DC load (e.g., lights, fans), connect it to the load terminals on the charge controller. This allows the charge controller to supply power to your DC load when there is excess energy. Secure the Wiring: Secure all wiring neatly, avoiding any sharp edges or areas where the wires might be subject to damage. Use appropriate cable management techniques. Check the Connections: Double-check all connections to ensure they are secure and correctly wired. Incorrect connections can damage your equipment. Power On: Once everything is connected, turn on the charge controller following the manufacturer's instructions. Monitor and Test: Monitor the charge controller regularly to ensure it's functioning as expected. You may also want to test the system's performance under different conditions. Rich Solar 30 Amp PWM Solar Charge Controller RS-PWM30K Technical Specifications PV voltage: ≤50V Rated Current: 30A System Voltage: 12V/24V Auto HVD: 16.00V×1/×2/×3/×4(0.5V) Rated discharging current: 30A No-load loss: ≤13mA Charge loop voltage drop: ≤0.24V Discharge loop voltage drop: ≤ 0.1V Charging mode: PWM 4-stage（bulk, absorption, float, equalized） Voltage of float charging: 13.8(13V~15V)×1/×2 Voltage of absorption charging: 14.4V(13V~15V) ×1/×2 Voltage of equalized charging: 14.6V(13V~15.5V) ×1/×2 Duration of equalized charging: 2hs LVD: 10.7V(10V~14V) ×1/×2 LVR: 12.6V(10V~14V) ×1/×2 Load working mode: Regular control mode, Light control with switch-off point at night and switch-on point before dawn, Light control mode Light control voltage: 5V(1V~10V) ×1/×2 Battery type: GEL, SLD, FLD and USR (default) USB: 5V 1A Wiring: PCB terminal, ≤16mm2 Working temperature: -20 ~ +55 °C