Rich Solar 30 Amp Solar Charge Controller Flush Mount

Rich Solar 30 Amp Solar Charge Controller Flush Mount  The Rich Solar RS-PWM30RV Solar Charge Controller is a 30 Amp flush-mounted controller, designed with maximum efficiency and reliability in mind. It features automatic temperature compensation, reliable overcharge protection, and auto-parameter configuration, making it perfect for long-term solar panel usage. Features Flush-mounted and embedded installation design High quality and low failure rate components (ST/IR) to ensure the product's lifetime 3-Stage intelligent PWM charging: Bulk, Boost/Equalize, and Float Battery Type: Sealed, Gel, Flooded Real-time energy statistics feature Battery temperature compensation feature Digital LCD monitor for informative display of operational parameters and fault messages Voltage drop and temperature compensation sampling interface design RS485 communication port with Modbus protocol, and short circuit protection for 5V/200mA power supply Multiple communication peripherals Rated charging current at working temperature without de-rating Extensive electronic protections Monitor and set the parameters via PC software or APP  Rich Solar RS-PWM30RV 30 Amp Solar Charge Controller Flush Mount Installation Choose a Suitable Location: Select a location that is easily accessible and well-ventilated. Ensure that the location is dry and away from direct sunlight. Mount the Charge Controller: Use the mounting holes on the charge controller to mark the positions on the wall or surface where you want to mount it. Drill pilot holes for the screws. Attach the charge controller to the wall using the mounting screws. Connect the Solar Panels: Connect the positive (+) and negative (-) wires from your solar panels to the corresponding terminals on the charge controller. Ensure a secure connection and use appropriate connectors or crimps. Connect the Battery: Connect the positive (+) and negative (-) wires from your battery to the corresponding terminals on the charge controller. Make sure the connections are tight and secure. Connect the Load (if applicable): If your charge controller has a load output for powering devices, connect the positive (+) and negative (-) wires from your load to the corresponding terminals on the charge controller. Check Wiring Polarity: Double-check that all the positive and negative connections are correct to avoid damaging the charge controller or connected devices. Secure Loose Wires: Use cable ties or clips to secure any loose wires and prevent them from interfering with the operation of the charge controller. Power On: If your charge controller has a power button, turn it on. Monitor the charge controller for any indicators that confirm proper operation. Test the System: Verify that the solar panels are charging the battery by checking the charge controller's display or indicators. If applicable, test the load output to ensure it is working correctly. Troubleshooting: If there are any issues, refer to the troubleshooting section in the user manual or contact Rich Solar customer support. Rich Solar RS-PWM30RV 30 Amp Solar Charge Controller Flush Mount RS-PWM30RV Technical Specifications Electrical Parameters Nominal System Voltage: 12/24VDC or Auto 12/24VDC or Auto Battery Input Voltage Range 8V～32V Rated Charge Current 30A Max. PV Short Circuit Current 30A Max. PV Open Circuit Voltage 50V Battery Type Sealed(default)/Gel/Flooded Self-consumption ≤4.2mA/12V;≤2.6mA/24V Temperature Compensation Coefficient -3mV/°C/2V(Default) Charge Circuit Voltage Drop 0.21V Environmental Parameters Storage Temperature Range -22°F～176°F Working Environment Temperature -4°F～131°F (100% input and output) Relative Humidity ≤95%, N.C. Enclosure IP30 Grounding Common negative Altitude 5000m Pollution Degree PD2 Mechanical Parameters Dimension(L×W×H) 178.5 × 105.5 × 48.3 mm Mounting Dimension 166.5 × 93.5 mm Mounting Hole Size Φ5mm Terminal 16mm2/6AWG Recommended Cable 6mm2/10AWG Net Weight .68 Lbs