Miniature Probe with Heater Assembly

Meets or exceeds the following methods/laws/requirements:   Section 4.1.1 (Probe), US EPA SW-846 Test Method 0031Section 6.1.1 (Probe), US EPA Method 7 Product Description Aer Sampling’s probe assembly in miniature size for non-isokinetic sampling (US EPA Method 7, US EPA SW-846 Test Method 0031 etc.) requires heating the sampled flue gas before it reaches the reagent or sorbent solution. Connect to metering console via an umbilical cable to start measuring and controlling temperature immediately. The front-end (head) of this miniature probe is inserted into the sampling porthole of the smoke-stack/chimney while the back end (tail) of this miniature probe is attached to an impinger box or a VOST glassware case using the probe clamp. This product connects to the following (non-exhaustive) list of products from Aer Sampling: PN-856  --- Miniature Probe Liner with Glass Cup PN-1053 --- VOST Glassware Case Assembly PN-769 --- PTFE Adapter Tube Fitting Other Applicable Documents:N.A.   Product Specifications Minimum porthole inside diameter needed: ~1.2 inch (30 mm)Connections:Head (Upstream/Facing the stack): Plain endTail (Downstream/Away from the stack):Plain end; with Type K thermocouple plug (x1) and IEC C14 plug (x1) Material and Temperature: Material Maximum Temperature Recommended Maximum Working Temperature Stainless steel 500 ºF (260 ºC)  - *The maximum temperature of PN-731 --- Miniature Probe with Heater Assembly is limited by the probe heater Voltage: 100-127, 220-240 Product dimension: Length (nominal; from tip to tail):English (ft): 3Metric (m): ~0.91  Outer Diameter (OD):English (inch): 3/4Metric (mm): ~19.05 Weight (Gravitational): 13.1 lbs / 6.0 kg Packing dimensions (Length x Width x Height):3 ft ProbeEnglish (inch): 34.6 x 3.1 x 1.0Metric (cm): 88.0 x 8.0 x 2.5 Other Information Order miniature probe liner separately.  All our products come with a one-year warranty against manufacturing defects and one-month technical support for free. Please refer to our Frequently Asked Questions (FAQs) page for more details. ----- Information presented here is subjected to Aer Sampling Group's terms and conditions.In case of discrepancy between English version and the non-English version, the English version shall prevail.Doc ID: AERHQWW-pn-731-enLast revised (Excluding prices): 0^; 01.13.21 Catalog ID Catalog/Product Name Obsolete Catalog ID(s) PN-731 220-240 V, Miniature Probe with Heater Assembly - PN-1525 100-127 V, Miniature Probe with Heater Assembly -